Air Filter Lid - ZR-1 Net Registry Forums

secondchance · 11-10-2019

Sort of been boring lately. So, I ordered a open filter lid from Eckler's only to find out it was a flimsy, cheap looking ABS plastic version - returned it of course!
Instead, I ordered a used OEM piece, chopped it up and painted it.

Ready to be installed.
https://flic.kr/p/2hHNrgT

Left over pieces.
https://flic.kr/p/2hHPx1T

lfalzarano · 11-10-2019

You butcher!

Check the plastic air filter housing that connects to the coupler. I’ve had several seams along the sides split open allow dirt and crap to bypass the filter. Path of least resistance!

Sent from my iPhone using ZR-1 Net Registry

secondchance · 11-10-2019

Thanks for the tip! I will check for sure.
While playing with it, I was pondering on mounting the filter on the flip side of the air box, cut a rectangular hole on the radiator shroud apron and drop in the assembly. This will allow the filter housing to suck the air when it enters the radiator intake area above the front air dam.
What do you think?

lfalzarano · 11-11-2019

My thoughts are if that was a good idea, then GM would have designed it that way to add performance. Located with the radiator and oil cooler, the filter would be subject to road debris. On top of the radiator shroud, it is protected by that plastic deflector in the nose. Just my opinion.

Sent from my iPhone using ZR-1 Net Registry

We Gone · 11-11-2019

I would think a flipped filter could be a water issue.

aafc · 11-11-2019

If you would like to help reduce intake air temp place a piece of Reflectix
( bubble warp ) between the air box and radiator shroud. Cut the piece a little smaller then the air box so you wont see it. It will help reduce radiant heat transfer to the air box.Take car for a ride and then check temp with a infrared thermometer at the radiator shroud, then check temp on the air box. You should see about a 15+ deg temp drop.

http://www.zr1.net/forum/picture.php...pictureid=3967

John
1990 white/black #2546
one of a few 4l8OE eq ZR-1's

lfalzarano · 11-11-2019

Good tip!

Sent from my iPhone using ZR-1 Net Registry

oldpro · 11-11-2019

I have a reverse air filter that was made before I got the car it seems to help a little a the strip . You want to make sure the filter is sealed well though

lfalzarano · 11-11-2019

Good read on the intake.

Increasing intake air flow on a LT5
https://r.tapatalk.com/shareLink?url...2&share_type=t

Sent from my iPhone using ZR-1 Net Registry

11-10-2019	#1
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Air Filter Lid Sort of been boring lately. So, I ordered a open filter lid from Eckler's only to find out it was a flimsy, cheap looking ABS plastic version - returned it of course! Instead, I ordered a used OEM piece, chopped it up and painted it. Ready to be installed. https://flic.kr/p/2hHNrgT Left over pieces. https://flic.kr/p/2hHPx1T

11-10-2019	#3
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: Air Filter Lid Thanks for the tip! I will check for sure. While playing with it, I was pondering on mounting the filter on the flip side of the air box, cut a rectangular hole on the radiator shroud apron and drop in the assembly. This will allow the filter housing to suck the air when it enters the radiator intake area above the front air dam. What do you think?

11-11-2019	#4
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Air Filter Lid My thoughts are if that was a good idea, then GM would have designed it that way to add performance. Located with the radiator and oil cooler, the filter would be subject to road debris. On top of the radiator shroud, it is protected by that plastic deflector in the nose. Just my opinion. Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

11-11-2019	#5
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,170	Re: Air Filter Lid I would think a flipped filter could be a water issue. __________________ Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold

11-11-2019	#6
aafc Join Date: Feb 2010 Location: Ochlocknee, GA Posts: 435	Re: Air Filter Lid If you would like to help reduce intake air temp place a piece of Reflectix ( bubble warp ) between the air box and radiator shroud. Cut the piece a little smaller then the air box so you wont see it. It will help reduce radiant heat transfer to the air box.Take car for a ride and then check temp with a infrared thermometer at the radiator shroud, then check temp on the air box. You should see about a 15+ deg temp drop. http://www.zr1.net/forum/picture.php...pictureid=3967 John 1990 white/black #2546 one of a few 4l8OE eq ZR-1's

11-10-2019	#2
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Air Filter Lid You butcher! Check the plastic air filter housing that connects to the coupler. I’ve had several seams along the sides split open allow dirt and crap to bypass the filter. Path of least resistance! Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

11-11-2019	#7
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Air Filter Lid Good tip! Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

11-11-2019	#8
oldpro Join Date: Feb 2018 Location: owens valley Posts: 25	Re: Air Filter Lid I have a reverse air filter that was made before I got the car it seems to help a little a the strip . You want to make sure the filter is sealed well though

11-11-2019	#9
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Air Filter Lid Good read on the intake. Increasing intake air flow on a LT5 https://r.tapatalk.com/shareLink?url...2&share_type=t Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]