Lower Seat Position

[Z51JEFF]

Years ago I put a 4-speed in a 64 Nova I had and I made some seat extensions that allowed me to put the seat back a little further,what I made is basically what you would need. I took some 1/2 inch thick aluminum that was 2 inches wide and a few inches longer than the seat mounts. I had some counter sunk threaded allen bolts come up from the bottom of the bracket to the seat frame and then bolted the bracket to the floor. I’ve got a picture I can send in an email.

[JThomas]

Originally Posted by XfireZ51

That was going to be my suggestion.
BTW Joe, speaking of extra room, I’m trying to get a group buy together for the Apsis D shape wheel. I know that would afford you some extra knee room and easier egress. Interested?
Full disclosure, I don’t know that Apsis would be interested but worth a try.

Yes Dom, I would be interested. I don't need the carbon fiber treatment, I just want the D shaped wheel with a "standard" leather wrap. That would fit my theme.

[XfireZ51]

Originally Posted by JThomas

Yes Dom, I would be interested. I don't need the carbon fiber treatment, I just want the D shaped wheel with a "standard" leather wrap. That would fit my theme.

Yeah, I don't need the CF either.

[Z51JEFF]

Joe you get my email?

[JThomas]

Originally Posted by Z51JEFF

Joe you get my email?

Yep, got it. Easter Sunday, responding a little slow.

[Z51JEFF]

Originally Posted by JThomas

Yep, got it. Easter Sunday, responding a little slow.

Let me know if I can help with this,I might have some T6061 aluminum but not sure on what size. If anything you get the material,get it to me and I can whip these up.