Oygen sensor removal, passenger side - Page 2 - ZR-1 Net Registry Forums

Young1 · 03-07-2018

I cut the pigtail off a defective sensor and sourced the lacking connector on e bay to create an extension. Situation solved forevermore. [emoji322][emoji41]

Sent from my iPhone using ZR-1 Net Registry

mike100 · 03-08-2018

I got mine done with the aid of a 15" long bladed flat screwdriver.

Reichert · 03-08-2018

Quote:

Originally Posted by Young1

I cut the pigtail off a defective sensor and sourced the lacking connector on e bay to create an extension. Situation solved forevermore. [emoji322][emoji41]

That's smart!

I got it done .. that was way harder than it should have been, even with the frame brace removed - they left no slack in that stupid cable.

Also, while staring at the oil pan, I found there was a missing bolt, so ordered a couple from Jerry's.

Z51JEFF · 03-09-2018

Quote:

Originally Posted by mike100

I got mine done with the aid of a 15" long bladed flat screwdriver.

That’s exactly how I did mine,just get the connector lined up then pop it into place.

03-07-2018	#11
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 898	Re: Oygen sensor removal, passenger side I cut the pigtail off a defective sensor and sourced the lacking connector on e bay to create an extension. Situation solved forevermore. [emoji322][emoji41] Sent from my iPhone using ZR-1 Net Registry __________________ Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much.

03-08-2018	#12
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,802	Re: Oygen sensor removal, passenger side I got mine done with the aid of a 15" long bladed flat screwdriver.