ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 01-18-2018   #41
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: Driver impressions from those who did some porting please

The trick is finding an LT4 system. Z06 cats are easy.
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 01-18-2018   #42
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Driver impressions from those who did some porting please

Quote:
Originally Posted by -=Jeff=- View Post
Gunny, how is the odor from having no cats? I found it a bit much on my Borla challenge system and I have cats with Corsa currently
Jeff,

Currently tuning Hans’ 90 w similar setup. Working on tuning out most of the rich smell which is typical at idle. We’ve been able to reduce it significantly.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 01-18-2018   #43
billschroeder5842
 
billschroeder5842's Avatar
 
Join Date: Nov 2016
Location: Southlake, TX
Posts: 592
Default Re: Driver impressions from those who did some porting please

Quote:
Originally Posted by WARP TEN View Post
Bill, George is right--If you like a sleeper look but the ability to add power and be very loud when you want it, go for headers (with or without cats), a stock '95 system with cutouts.
Wow, what a slick system- I bet that is a lot of fun!
__________________
Bill Schroeder
Texas Proud!

1991 Corvette ZR1 #1388
2015 Challenger Scat Pack Shaker

billschroeder5842 is offline   Reply With Quote
Old 01-19-2018   #44
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Driver impressions from those who did some porting please

Quote:
Originally Posted by billschroeder5842 View Post
Wow, what a slick system- I bet that is a lot of fun!
Some of us here in the Windy are using the C6Z06 NPP valves mated to DynoMax Ultraflow muffs. I have a switch in the center console controlling Open/Close on these. I mostly drive w them closed. Even w/o resonator, they do a good job of controlling drone IMO. Especially w better tuning.
W the valves open, everything still goes thru the muffs but now a second opening is operative giving the exhaust a deeper bass note much like a big block.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 01-19-2018   #45
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
Default Re: Driver impressions from those who did some porting please

Quote:
Originally Posted by -=Jeff=- View Post
Gunny, how is the odor from having no cats? I found it a bit much on my Borla challenge system and I have cats with Corsa currently
There was definitely a strong odor in the garage on start up but as Gunny notes, not at 70 mph. Marc reminded me that it is what cars smelled like in the 60s and 70s. I think if i still had the '95 I would add some bullet cats or maybe the Z06 ones noted elsewhere to minimize this. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 01-19-2018   #46
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
Default Re: Driver impressions from those who did some porting please

Quote:
Originally Posted by billschroeder5842 View Post
Wow, what a slick system- I bet that is a lot of fun!
For me it was certainly the perfect system and I did enjoy it. Always fun to be sitting quietly at a light then open up the cutouts. Or starting the car with the cutouts open, say when you are leaving a car show.--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 01-19-2018   #47
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Driver impressions from those who did some porting please

Quote:
Originally Posted by XfireZ51 View Post
Jeff,

Currently tuning Hans’ 90 w similar setup. Working on tuning out most of the rich smell which is typical at idle. We’ve been able to reduce it significantly.
Understood, but it is still there. I have almost all the pieces, i just need to make them all fit together
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 01-19-2018   #48
rush91
 
Join Date: Feb 2016
Location: Carterville Illinois
Posts: 852
Default Re: Driver impressions from those who did some porting please

Bill, you just couldn't leave it original huh lol.......Mods on these cars are addictive. Once one starts, it's hard to not keep going! I plan on making it to Bowling Green this year for the Gathering, and plan on asking you guys with Mods ALOT of questions!!! And maybe ask for some ride alongs, to get a feel for the different exhaust / header combos.......Ya, I'm going to be that guy who asks a million questions lol.
rush91 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020