List of C4 ZR-1/LT5 Repair, Maintenance, and Performance Shops

[EvanZR1]

Originally Posted by Ccmano

Any votes for Dave Mullins Corvette in Dallas?
H

That would be DMS Corvette Shop in Garland (suburb of Dallas). I sent them an email to see if they are familiar with ZR-1s, if they are, I'll check them out.

[Z51JEFF]

Precision Motive in Hayward Ca has worked on ZR-1s in the past but don’t know how extensive the Z knowledge is at that shop. I do know they put the automatic in the Steel Blue 91 with the Shinoda body kit floating around and worked out all the bugs,not sure who did the plumbing for the nitrous setup. The owner of the shop Pat Hendrix is a great guy to deal with and he’s had this shop for years.

[Ccmano]

Possibly the better solution is to list two categories. Vetted known level one “Master Shops” and level two “Basic Competency” Shops. Based on member feed back we can move shops between the two or out altogether.
H

[Ccmano]

What’s the story on South Georgia Corvette? Still in business? They did a lot of Z work 10years ago.
H

[precast1]

Originally Posted by Ccmano

What’s the story on South Georgia Corvette? Still in business? They did a lot of Z work 10years ago.
H

South Georgia Corvette is alive and well Aaron Scott is working on my car right now.

He has a beautiful garage in Thomasville, Ga At the current time he has 8 or 9 cars in the shop. The quality of his work is unbelievable. He will not do something that isn't done to a very high standard.

He is also a very nice guy and has no problem sharing his knowledge.

Please if your anywhere close just go check out his shop you will be nothing but impressed.

Thank you,

Tom

Sent from my SM-G950U using ZR-1 Net Registry mobile app

[Ccmano]

Originally Posted by precast1

South Georgia Corvette is alive and well Aaron Scott is working on my car right now.

He has a beautiful garage in Thomasville, Ga At the current time he has 8 or 9 cars in the shop. The quality of his work is unbelievable. He will not do something that isn't done to a very high standard.

He is also a very nice guy and has no problem sharing his knowledge.

Please if your anywhere close just go check out his shop you will be nothing but impressed.

Thank you,

Tom

Sent from my SM-G950U using ZR-1 Net Registry mobile app

We have heard this was the case. Your the first to confirm.
Thanks
H

[precast1]

Originally Posted by Ccmano

We have heard this was the case. Your the first to confirm.
Thanks
H

Picked up the car yesterday from South Georgia Corvette, Aaron Scott replaced the injectors and changed all fluids. Burned a new chip. Took the car on an extensive test drive. Car was spotless cleaner than when I dropped it off. Just got done driving it this afternoon 94 degrees here today got to 7000 rpm immediately. Ran it hard for 45 minutes never over 5/8 on the heat gauge. Car was done on time as promised. His shop is neat and beautiful. Shared the pictures with me on the record setting run of 24 hours with Tommy Morrison. He will be doing some complete builds for me very soon. Knows everying there is to know about the ZR1 as he was there at the start. If your with in a days travel bring your car to him if you want it done right. By the way the charges for all he did was very reasonable a bit less than I expected which is always a nice surprise.

Sent from my SM-G950U using ZR-1 Net Registry mobile app