1990 ZR1 fuel rail "O" rings

[TonyTZR1]

Sent you a PM. Thank you very much.

Merry Christmas and Happy New Year

[TonyTZR1]

Yes, the ones I need are in the housing, the large ones that go around the body of the injector.

Thanks again

[cuisinartvette]

I dont know if they are the same or not but I have a pack (Im pretty sure) of new Felpro L98 injector Orings. If anyone knows if they will work I will send them off to you tony, gratis

[TonyTZR1]

Thank you very much. If these are the large ones, 7/8"OD, 5/32"thick, 5/8" ID that would be them. I'll do some checking and get back to you.

[bobbyhi]

Not to seal this thread, but I need a couple of the orange rectangular electrical washers that attach to the injectors. Any place to purchase these???

[TonyTZR1]

Bob;

I will ask my son, he works at a fuel injection shop. He has been looking for some of the "O" rings I need with partial success. Will have to wait until Monday.

Tony

[Tyler Townsley]

Originally Posted by TonyTZR1

Bob;

I will ask my son, he works at a fuel injection shop. He has been looking for some of the "O" rings I need with partial success. Will have to wait until Monday.

Tony

See if you can find a shop that fixes farm equipment. There is a shop in Sebring that repairs hydrolic truck/farm equipmenr and they have a large supply of o-rings and one just takes your original down and the guy hunts through a few bins and comes back with the right one. Check the phone book in your area.

Tyler

[TonyTZR1]

Tyler;

Thanks for the information. I ended up at a Hydraulic Contrlos out fit and they ordered me the correct ones. Viton and .43cents a piece.