Photoshoot with a Crystal Red ZR1 cousin

[VetteFantasy]

Originally Posted by Regimof

Is yours lowered? Damn that looks good like that.

Thanks! Yes, lowered on coilovers. The wheels are powder coated originals.

[Regimof]

Originally Posted by VetteFantasy

Thanks! Yes, lowered on coilovers. The wheels are powder coated originals.

Who'd you get em from? Did you have to shorten the driveshaft?

Nicely done on both fronts

[VetteFantasy]

Originally Posted by Regimof

Who'd you get em from? Did you have to shorten the driveshaft?

Nicely done on both fronts

I bought the car fully built and track-prepped, so I don't know the specifics. They are DRM coilovers - http://dougrippie.com/products/drm-c...e-with-shocks/ - and Haibeck installed them. Here are the notes from Marc:

“A coilover suspension upgrade was installed. The shock absorbers were reconditioned and revalved to the Moraca valving. The front springs are 550 lbs./inch. The rear springs are 350 lbs./inch. New boots were installed on the front tie rods. Heat shields were installed to protect the boots. The ride height was set with six threads in the front and 12 threads in the rear. When adjusting the ride height the threaded sleeve must be held to prevent rotation.”