|
09-04-2017
|
#11 | |
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,094
|
Re: DIY glass top repair?
Quote:
Paul, I concur you should just get a new one. I bought a replacement transparent top for my '95 at Melrose. Gave them my old one (it was a replacement in its own right, made out of Lexan, not Polycarbonate, and had cracked). They required it as a trade in because they could reuse the frame (also was a replacement, but an OEM one, with no serial number on it). The one I got from Melrose also had no serial number on it--it is illegal to add or change a serial number. Had a good experience with Melrose and you can just drive to them. And cash gets you a discount--at least it got me one. Can't recall what I paid but it was in the neighborhood of $600-$650 I think. As an added incentive, the owner owns and displays one of the Morrison cars--at least he did when I bought my top in 2013. Melrose Corvette, 100 West Ellwalk Avenue | Cortland, IL 60112 | Phone: 815-758-2783 | Fax: 815-758-2796 --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" Last edited by WARP TEN; 09-04-2017 at 11:15 AM. |
|
|
|
|
09-04-2017
|
#12 | |
 
Join Date: Sep 2008
Location: Mullica Hill, New Jersey
Posts: 2,593
|
Re: DIY glass top repair?
Quote:
Those use a GM frame with similar Glass. They are equal in quality to the original, as well as Melrose.  Marty |
|
|
|
|
|
09-05-2017
|
#13 |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: DIY glass top repair?
Gentlemen!
Just wanted to acknowledge the replies! I'm taking notes as this goes on (for a while more). Thanks for the guidance so far. I was really at "square one" on this one.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
09-05-2017
|
#14 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: DIY glass top repair?
I highly suggest Melrose.. one on my car I got from them in 2008.. no issues
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
 |
|
|
Linear Mode
