ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 09-26-2007   #1
ArcticZR1
 
ArcticZR1's Avatar
 
Join Date: Feb 2007
Location: Florida
Posts: 82
Default My clutch is shot.

My clutch started slipping bad today. I swung into the Chevy dealer and they told me it's shot and I need a new preassure plate and clutch kit. They told me a new preassure plate is discontinued and a new flywheel is 2 grand. Plus 8 hrs of labor...and the clutch slave. The car is still drivable but won't handle the torque in first while accel. Engine is strong. Clutch is soft and there is chatter when I depress it. Any advice?
__________________
ArcticZR1
91' White/Red #858

Last edited by ArcticZR1; 09-26-2007 at 09:48 PM.
ArcticZR1 is offline   Reply With Quote
Old 09-26-2007   #2
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
Default Re: My clutch is shot.

Yep! Don't let them do the work. How could they know if you need a new flywheel without inspecting it? Whether you want a stock type or various levels of high performance, there are lots of choices for clutches. Should you need a flywheel, good used dual mass (stock) flywheels are available and a Fidanza flywheel can be had new for about $400 or less.

Aaron Scott (SGC) in Thomasville, GA would be a great place to take it to. He can give you all the options & recommendations. His reputation is impeccable.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.

Last edited by A26B; 09-26-2007 at 10:24 PM.
A26B is offline   Reply With Quote
Old 09-26-2007   #3
ArcticZR1
 
ArcticZR1's Avatar
 
Join Date: Feb 2007
Location: Florida
Posts: 82
Default Re: My clutch is shot.

Thank you. I just added fluid to the slave and still slipping. The flywheel sounds like it has high spots so I'm probably going to have to replace it all. So I should go with Findaza flywheel and clutch...or valeo?
__________________
ArcticZR1
91' White/Red #858
ArcticZR1 is offline   Reply With Quote
Old 09-27-2007   #4
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: My clutch is shot.

Quote:
Originally Posted by ArcticZR1
Thank you. I just added fluid to the slave and still slipping. The flywheel sounds like it has high spots so I'm probably going to have to replace it all. So I should go with Findaza flywheel and clutch...or valeo?

Contact the ZFDOC he might have a few ideas for you
GOLDCYLON is offline   Reply With Quote
Old 09-28-2007   #5
WB9MCW
 
WB9MCW's Avatar
 
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
Default Re: My clutch is shot.

http://www.zr1netregistry.com/forum/...arolina+clutch
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg
http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif
"The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC
" We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln
WB9MCW is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020