ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 12-08-2015   #1
edram454
 
edram454's Avatar
 
Join Date: Nov 2013
Location: ..
Posts: 693
Default Oil Sensors

anybody ever have a oil sensor leak fresh oil?? in the assembly manual it shows an exploded picture of the oil assembly and it shows 2 sensors, one on top and one under and to the right of the oil filter. there is a third sensor that talks to the computer. I think the top sensor is for your oil gauge and the other is oil temp and the third one not in the exploded picture is the one that is leaking. I was smelling fresh oil on the right side of my engine and I saw some on the right frame rails and under the oil filter.. this car was moving for some time at 70 mph so the oil leaks and runs down the frame rails and everything else. all this is on the right side of the engine. apparently, this sensor is very hard to get to and requires the engine to be tilted to have the space to change the sensor. I have not found one technical drawing that shows that third sensor. ideas??

ed ramos #3028
__________________
EDRAM454


1990 #3028..siamese ported plen/hous/SGC/fidanza/DRM LTHeaders/DRM roll cage/camber rod/drilled slot rotors hawk track pads/grand sport calipers/full corsa exhaust/Hurst/NO cats/custom SGC chip/cbeamplate/315's on all 4/intake water plugged/smog removed..RC injectors/LED lights..SHOULD NOT HAVE PUT ALL THE MONEY IN IT.. SOLD.
edram454 is offline   Reply With Quote
Old 12-08-2015   #2
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Oil Sensors

Quote:
Originally Posted by edram454 View Post
anybody ever have a oil sensor leak fresh oil?? in the assembly manual it shows an exploded picture of the oil assembly and it shows 2 sensors, one on top and one under and to the right of the oil filter. there is a third sensor that talks to the computer. I think the top sensor is for your oil gauge and the other is oil temp and the third one not in the exploded picture is the one that is leaking. I was smelling fresh oil on the right side of my engine and I saw some on the right frame rails and under the oil filter.. this car was moving for some time at 70 mph so the oil leaks and runs down the frame rails and everything else. all this is on the right side of the engine. apparently, this sensor is very hard to get to and requires the engine to be tilted to have the space to change the sensor. I have not found one technical drawing that shows that third sensor. ideas??

ed ramos #3028
Engine Oil Pressure/Temperature Sensors

Oil Filter Adapter Sensors ..............................................Oil Filter Adapter Ports and Sensors

Last edited by Dynomite; 12-08-2015 at 10:18 PM.
Dynomite is offline   Reply With Quote
Old 12-08-2015   #3
edram454
 
edram454's Avatar
 
Join Date: Nov 2013
Location: ..
Posts: 693
Default Re: Oil Sensors

Mr. Dynamite you are a monster of information. Thank you for this wonderful pics. Its guys like you that make this forum extremely valuable.

Thanks!!

ed ramso #3028
__________________
EDRAM454


1990 #3028..siamese ported plen/hous/SGC/fidanza/DRM LTHeaders/DRM roll cage/camber rod/drilled slot rotors hawk track pads/grand sport calipers/full corsa exhaust/Hurst/NO cats/custom SGC chip/cbeamplate/315's on all 4/intake water plugged/smog removed..RC injectors/LED lights..SHOULD NOT HAVE PUT ALL THE MONEY IN IT.. SOLD.
edram454 is offline   Reply With Quote
Old 12-09-2015   #4
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Oil Sensors

Quote:
Originally Posted by edram454 View Post
Mr. Dynomite you are a monster of information. Thank you for this wonderful pics. Its guys like you that make this forum extremely valuable.

Thanks!!

ed ramso #3028
Thank You Sir........
Any time from Cliff #3032 (four cars behind you on Assembly Line in 1990)
Dynomite is offline   Reply With Quote
Old 12-09-2015   #5
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Oil Sensors

Quote:
Originally Posted by edram454 View Post
Mr. Dynamite you are a monster of information. Thank you for this wonderful pics. Its guys like you that make this forum extremely valuable.

Thanks!!

ed ramso #3028
I agree! Personally, ah doan need no mo "T" shirts... I gladly pay for Cliff's SOLUTIONS page and the rest of the forum support!
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 12-10-2015   #6
edram454
 
edram454's Avatar
 
Join Date: Nov 2013
Location: ..
Posts: 693
Default Re: Oil Sensors

Quote:
Originally Posted by Dynomite View Post
Thank You Sir........
Any time from Cliff #3032 (four cars behind you on Assembly Line in 1990)
Yes Sir, yours is the last one for 1990!

ed ramos #3028
__________________
EDRAM454


1990 #3028..siamese ported plen/hous/SGC/fidanza/DRM LTHeaders/DRM roll cage/camber rod/drilled slot rotors hawk track pads/grand sport calipers/full corsa exhaust/Hurst/NO cats/custom SGC chip/cbeamplate/315's on all 4/intake water plugged/smog removed..RC injectors/LED lights..SHOULD NOT HAVE PUT ALL THE MONEY IN IT.. SOLD.
edram454 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020