|
11-25-2015
|
#1 |
 Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
ZR-1 Parts - Part 7
Drive belt tensioner from 16,000-mile ZR-1. Works fine, good tension. Needs bearing in pulley. You can get one from NAPA and exchange the bearings. $30.00 plus shipping
  Complete set of ZR-1 hose clamps. There’s actually more than needed, but I won’t separate. Some new, some used, all good. $25.00 plus shipping  Two seat switch bezels. NIB. I had to replace a bunch of plastic part son my 1990 and these were left over. $15.00 plus shipping  Call Jim at 214.912.9577 or text/email. |
|
|
|
11-25-2015
|
#2 |
  
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,816
|
Re: ZR-1 Parts - Part 7
I think I already took the seat bezels in the other thread??
If not...will take these also...... 
__________________
Clickable links  On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS |
|
|
|
|
11-25-2015
|
#3 |
 
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,402
|
Re: ZR-1 Parts - Part 7
I will take the tensioner. PM sent
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
11-25-2015
|
#4 |
|
Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
Re: ZR-1 Parts - Part 7
Seat switch bezels and tensioner are SOLD. Thanks again, Cliff, Jerry
|
|
|
|
|
11-25-2015
|
#5 |
|
Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
Re: ZR-1 Parts - Part 7
Hose clamps are SOLD. Thanks, Tony
|
|
|
|
|
11-28-2015
|
#6 |
|
Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
Re: ZR-1 Parts - Part 7
All these parts are sold
|
|
|
|
 |
|
|
Linear Mode
