|
09-22-2015
|
#1 |
 Join Date: Nov 2014
Location: Brooklyn ny
Posts: 1,044
|
HELP !! May need help installing ported plenum and injector housing.
I'm just a few nuts and bolts away from sending out my plenum and I/Hs to get ported......
My question is when I get it back I'm thinking I may,or I should say definately I will need help installing them back in.. I have a friend who is a top performance mechanic but I'm just guessing he may be unreliable when I get the parts back.. So, my question - are there any members in the NY area that could help? Of course without question I will pay you generously , I just want the job done...I just would feel more comfortable doing it with someone who is familiar with this.. I am located in Brookyln NY just five minutes from Verrazano bridge...I would even pick you up..Car is a 91 and in my garage.. Thank you....John.. |
|
|
|
09-22-2015
|
#2 |
|
Join Date: Jun 2012
Location: PA
Posts: 770
|
Re: HELP !! May need help installing ported plenum and injector housing.
If you were closer I'd be more than happy to lend a hand, for free (so would a bunch of others). If your going to pull the plenum and IH yourself, you might as well drop it back in yourself. It's not too difficult of a job. Plenty here could help guide you if you run into trouble. Make sure you have a FSM and get new plenum and IH gaskets (Jerry) and you'll need a chip with a tune, to maximize the porting (Marc). If you haven't done it already, you might as well change the coil packs, injectors, plugs, and wires while you have the plenum off.
|
|
|
|
|
09-22-2015
|
#3 |
|
Join Date: Jun 2013
Location: Toronto
Posts: 780
|
Re: HELP !! May need help installing ported plenum and injector housing.
Post up any questions along the way. I just dug in there and did it all myself for the first time the forum was a huge help to me and I got it all done without issue. If I was closer I'd lend a hand but I'm in Toronto. are you eliminating the secondaries or anything ?
|
|
|
|
|
09-22-2015
|
#4 |
|
Join Date: Nov 2014
Location: Brooklyn ny
Posts: 1,044
|
Re: HELP !! May need help installing ported plenum and injector housing.
Thanks for the replies so far guys....I basically did all the removal myself....My friend stopped by and just guided me for a few minutes..
Should have everything off soon and hoping to send it out this week... Hopefully when I get it back I will get a response from a member personally and go from there.....Any questions I have I will definately post no matter how ridiculous they are.. Not eliminating the secondaries but how can I tell if the injectors were changed? Serial numbers on them? |
|
|
|
|
09-22-2015
|
#5 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: HELP !! May need help installing ported plenum and injector housing.
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
09-22-2015
|
#6 |
|
Join Date: Nov 2014
Location: Brooklyn ny
Posts: 1,044
|
Re: HELP !! May need help installing ported plenum and injector housing.
No name brands just plain silver in color....The passenger side injectors have serial numbers 1637......The drivers side are different serial numbers...
|
|
|
|
|
09-23-2015
|
#7 |
 
Join Date: Dec 2007
Location: NYC
Posts: 1,185
|
Re: HELP !! May need help installing ported plenum and injector housing.
Should be straight forward putting it back on let me know if you need a copy of the service manual I have a PDF copy.
__________________
90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD" |
|
|
|
 |
|
|
Linear Mode
