08-08-2015 | #31 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Whats Next?
We should probably let Lee have his thread back. Maybe start a new one. Paul is correctly characterizing my discussion. It really goes back to breathing more lift/duration or more valves. I feel that a OHV motor is optimized for a particular region of the rpm band whereas an OHC 4 valve has great breathing ability without as much of a sacrifice to reasonable part throttle and idling characteristics. When it comes to all out performance, it's clear GM has decided on the in block cam config and for a lot of very good reasons like packaging, weight, center of gravity, simplicity, hood line, etc, etc. and w the engine management capability of today's processors, the LS/LT motors can really be made to perform and behave all at the same time.
Commenting on the cylinder head, my point was really about how capable the LT-5 heads are given they were designed for a 5.7ish L motor and yet can be found supporting motors of nearly 26% more displacement. In addition, it's all we've got, there ain't no more. no AFR, no TrickFlow, no Brodix, no nuthin'. Not to mention crank and cams. It's all on us here. Nobody out there helping us out. Just like Lee here doing it pretty much on his own, his own time, his own money. That's why I admire the LT-5.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
08-08-2015 | #32 |
Join Date: Dec 2012
Location: Ponoka, Alberta, Canada
Posts: 158
|
Re: Whats Next?
"Well, perhaps that's all that matters to some. But, to others, myself included, a rough-idling, over-heating in traffic, often stalling beast with high stall rpm converters, or no off-idle torque...is no fun to drive: been there, done that! "
So have I, trip to B.C. last year, car was stumbling, flooding. Stop and Go traffic was a killer. Turned out to be O2 sensors, but that trip was a nightmare. Lee's experiment was good, altho the results weren't what was expected, it may provide some insight to the next step.
__________________
91 ZR-1 Arctic White/Gray 01 C-5 Magnetic Red/Black 85 FJ 1100 (Big Bore kit, Hooligan Bike) 05 FJR 1300 Yamaha (Long Distance, Sport Touring) And a whole whack of RC Planes |
08-10-2015 | #33 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Whats Next?
Going back to the dyno soon
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
08-12-2015 | #34 | |
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
Re: Whats Next?
Quote:
And just so you know I'm not poking you Paul, on the street I could not imagine anything of the sort... Honestly the car reminded me very much of the ZR-1 on a 1st gear parking lot course. I now see why the SCCA rules guys were focused on making sure you could not put an automatic behind a ZR-1 within the rules when I asked them to combine all C4's (so I could use the quick rack). Later, - Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
|
08-12-2015 | #35 | |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Whats Next?
Quote:
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|