|
|
|
05-26-2015
|
#1 | |
 
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,684
|
Re: Jumper to avoid being stranded with a failed Primary Fuel Pump
Quote:
Black - DC ground Purple - Fuel level sensor signal to the fuel gauge display Gray - 12 vdc to a fuel pump Lt Green (or Green/White) - 12 vdc to the other fuel pump My short jumper is just a cross-over jumper, as Cliff said. By switching (crossing) the gray and green wires, the 12 vdc from the Primary Fuel Pump is routed to the Secondary Fuel Pump. The part number for the connector on the harness (car side) is: Connector, elec, Fuel Pump, Male GM 12085534 (AC Delco PT145) Here is the part on Amazon: http://www.amazon.com/ACDelco-PT145-.../dp/B000C9SNX0 I haven't verified by ordering the connector for the pump side of the connection. I got the connector I used from a take-out fuel pump assembly from WAZOO donated parts. I THINK (but haven't verified) that GM 88861069 is the female connector, but I can't find a source with a picture. Jim |
|
|
|
|
05-26-2015
|
#2 | |
  
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,816
|
Re: Jumper to avoid being stranded with a failed Primary Fuel Pump
Quote:
 I am not so sure about that GM88861069 for female connector. I cannot find that on Amazon. If someone finds a source of that female connector that would be great......
__________________
Clickable links  On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS |
|
|
|
|
|
05-26-2015
|
#3 |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,117
|
Re: Jumper to avoid being stranded with a failed Primary Fuel Pump
Hmm i'm piecing some parts together. If it works out I could make a small run of these to those who are interested if Jim is not adverse to it. Jim any issues since its your idea ?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
 |
|
|
Hybrid Mode
