ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-17-2015   #6
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,817
Default Re: Clicking from this… what is it?

Quote:
Originally Posted by G-Sting View Post
Dynomite, that (in bold) did it! Holding finger over the end of the nylon vacuum line resulted in the vacuum pump cycling about every 10 seconds - much less often.

The rubber fitting appeared to be very lose, and I zip-tied it to hold the nylon vacuum line tighter, but no change in the 1.5s cycling of the vacuum pump. Must be the aforementioned leaky check valve?

Great pics, BTW!

Vacuum Check Valve

Make sure it is installed correct direction

Unfortunately you have to remove Plenum to Replace Check Valve.
Dynomite is online now   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:59 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025