looking for harness brackets/clamps - ZR-1 Net Registry Forums

-=Jeff=- · 04-20-2015

Not sure the specific name, but I am looking for the harness brackets that hold the harness at the Bellhousing

Thanks

Pete · 04-21-2015

Jeff I think I know what your talking about.
I know I have one somewhere when I find it it's yours.

Pete

-=Jeff=- · 04-21-2015

Thanks Pete!!

We need to do pizza again soon

cvette98pacecar · 04-22-2015

Quote:

Originally Posted by -=Jeff=-

Thanks Pete!!

We need to do pizza again soon

We did a pizza nite two weeks ago.

-=Jeff=- · 04-22-2015

Why wasn't i invited?

WVZR-1 · 04-22-2015

I would think that any purchase locally of an appropriate sized Adel clamp would do as well or better than anything removed from an original harness. The original harnesses most of the time had the retainer/strap or whatever taped right into the harness so it was in the correct location for attachment.

Google for "Adel clamp" should get you going.

Nearly all of the Delphi conduit and harness hardware is here:

http://catalog.delphi.com/connectors...,164483,165225

Many classes of hardware retainers.

The very unusual shaped conduit clamps I've not seen in some time. They could very well be included in the Delphi document I linked.

04-20-2015	#1
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,156	looking for harness brackets/clamps Not sure the specific name, but I am looking for the harness brackets that hold the harness at the Bellhousing Thanks __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

04-21-2015	#2
Pete Join Date: Dec 2003 Location: Chicagoland,IL Posts: 2,667	Re: looking for harness brackets/clamps Jeff I think I know what your talking about. I know I have one somewhere when I find it it's yours. Pete __________________ '91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage

04-21-2015	#3
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,156	Re: looking for harness brackets/clamps Thanks Pete!! We need to do pizza again soon __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

04-22-2015	#5
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,156	Re: looking for harness brackets/clamps Why wasn't i invited? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

04-22-2015	#6
WVZR-1 Join Date: Oct 2004 Posts: 1,884	Re: looking for harness brackets/clamps I would think that any purchase locally of an appropriate sized Adel clamp would do as well or better than anything removed from an original harness. The original harnesses most of the time had the retainer/strap or whatever taped right into the harness so it was in the correct location for attachment. Google for "Adel clamp" should get you going. Nearly all of the Delphi conduit and harness hardware is here: http://catalog.delphi.com/connectors...,164483,165225 Many classes of hardware retainers. The very unusual shaped conduit clamps I've not seen in some time. They could very well be included in the Delphi document I linked. Last edited by WVZR-1; 04-22-2015 at 07:30 PM.