Ported Intake - ZR-1 Net Registry Forums

Locobob · 03-11-2015

Early style (90-92) ported plenum and injector housings for sale. Plenum ports are 36mm at gasket surface and grow larger upstream, inside of plenum has been extensively worked, corner bolt holes have been sleeved for alignment, throttle bores have been enlarged to accept 63mm throttle body. Injector housings are 36mm through secondary ports, secondary bosses reduced and contoured, primary ports are 36mm halfway down the ports and reduce to 34.5mm at head gasket surface for optimal transition to stock 32mm primary head ports, primary injector bosses have been eliminated.
Easy 25hp bolt on for stock LT-5. Exterior refinishing is recommended, can arrange top end powder coating for extra.
$1500 outright.

Locobob · 03-11-2015

efnfast · 03-12-2015

I bought a set of these from Locobob. No issues, and nice bolt on power. Thanks Bob. -Steve

Jagdpanzer · 03-12-2015

Excellent work Bob!

GOLDCYLON · 03-12-2015

Any trades for a stock plenum and housing? I'd be interested in the offset cost . Robert

Dynomite · 03-13-2015

Quote:

Originally Posted by GOLDCYLON

Any trades for a stock plenum and housing? I'd be interested in the offset cost . Robert

I think Robert said......on the "other Forum".......

Yes - forgot to post - $900 + shipping with core return.....

Just in Case Robert is off for the weekend

efnfast · 03-13-2015

Gee, that might even be the core I sent him.

Locobob · 03-13-2015

Quote:

Originally Posted by efnfast

Gee, that might even be the core I sent him.

You would be correct Steve... not turning these out as fast as I used to.

Daryl - yeah I'll do $900 with exchange, do you have another Z or something? thought yours was already all done up?

efnfast · 03-13-2015

If it matters, these came off my 90 with 61K on them. My new ones look most beautiful all powder coated and going down the road much faster.

Vette73 · 03-13-2015

Ok so if you send your stock plenum the cost is 900 plus the shipping?
Just curious....

03-11-2015	#1
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,047	Ported Intake Early style (90-92) ported plenum and injector housings for sale. Plenum ports are 36mm at gasket surface and grow larger upstream, inside of plenum has been extensively worked, corner bolt holes have been sleeved for alignment, throttle bores have been enlarged to accept 63mm throttle body. Injector housings are 36mm through secondary ports, secondary bosses reduced and contoured, primary ports are 36mm halfway down the ports and reduce to 34.5mm at head gasket surface for optimal transition to stock 32mm primary head ports, primary injector bosses have been eliminated. Easy 25hp bolt on for stock LT-5. Exterior refinishing is recommended, can arrange top end powder coating for extra. $1500 outright. __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 Last edited by Locobob; 03-11-2015 at 09:28 PM.

03-11-2015	#2
Locobob Join Date: Jan 2004 Location: Portland, OR Posts: 1,047	Re: Ported Intake __________________ Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 Last edited by Locobob; 03-11-2015 at 09:28 PM.

03-12-2015	#3
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,574	Re: Ported Intake I bought a set of these from Locobob. No issues, and nice bolt on power. Thanks Bob. -Steve

03-12-2015	#4
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,651	Re: Ported Intake Excellent work Bob! __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

03-12-2015	#5
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,117	Re: Ported Intake Any trades for a stock plenum and housing? I'd be interested in the offset cost . Robert __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

03-13-2015	#7
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,574	Re: Ported Intake Gee, that might even be the core I sent him.

03-13-2015	#9
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,574	Re: Ported Intake If it matters, these came off my 90 with 61K on them. My new ones look most beautiful all powder coated and going down the road much faster.

03-13-2015	#10
Vette73 Join Date: Nov 2014 Location: Brooklyn ny Posts: 1,044	Re: Ported Intake Ok so if you send your stock plenum the cost is 900 plus the shipping? Just curious....