|
07-09-2007
|
#1 |
 Join Date: Jun 2007
Location: lasalle michigan
Posts: 61
|
rear window drain
like to know if any one installed the rear window drain kits and if they work.
|
|
|
|
07-09-2007
|
#2 | |
 
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,397
|
Re: rear window drain
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
07-09-2007
|
#3 |
|
Join Date: Dec 2004
Posts: 46
|
Re: rear window drain
yes and yes
92 ZR-1 #330 White/ yes and yes  92 ZR-1 #330 White/White |
|
|
|
|
07-09-2007
|
#4 |
|
Join Date: Dec 2004
Posts: 46
|
Re: rear window drain
yes and yes
92 ZR-1 #330 White/White |
|
|
|
|
07-10-2007
|
#5 |
 Join Date: Sep 2006
Location: Olympia
Posts: 161
|
Re: rear window drain
Yes and Yes. I actually get a sucking sound the water goes down so fast.
|
|
|
|
|
07-10-2007
|
#6 |
|
Join Date: Jun 2007
Location: lasalle michigan
Posts: 61
|
Re: rear window drain
thanks every one putting my order today
|
|
|
|
|
07-10-2007
|
#7 |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,704
|
Re: rear window drain
I put one on my '87 and thought it was a real POS. I got the Mid America kind that came with the drill bit. Well the brass part didn't sit flush, and the lip was so high lots of water didn't drain. Much of what did drain drained between the hose and the body, not through the hose.
But maybe I just sucked at installing it. I just found most of that mid america stuff like the drains and such to be junk. |
|
|
|
|
07-10-2007
|
#8 | |
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 983
|
Re: rear window drain
Quote:
Where are you ordering from?? |
|
|
|
|
|
07-10-2007
|
#9 |
Join Date: Aug 2005
Location: Anaheim, California
Posts: 105
|
Re: rear window drain
I may be considered a cheapskate but I just use a length of 1/4" vacuum hose to siphon the water out of mine. The end is trimmed so that it can fit down in there better and it gets the water out just fine.
I don't want to trust my clutziness to drilling a pair of holes in the body. SharkPilot |
|
|
|
|
07-11-2007
|
#10 |
|
Join Date: Jun 2007
Location: lasalle michigan
Posts: 61
|
Re: rear window drain
corvette central
|
|
|
|
 |
|
|
Linear Mode
