Need help. Hard top foam padding. - ZR-1 Net Registry Forums

nelson007 · 08-12-2014

Can someone advise me where to,purchase the foam headliner. After removing the one in my car it looks pretty bad.
Thanks,
Nelson007

Z06scentair · 08-12-2014

Corvette America sells an entire new liner for $149. Mine looked bad when I pulled it out.

Would have never had a sound sleep if I had put new fabric over that broken up board.

My problem is I ordered as always from Corvette Central only to find out Corvette America is the manufacture. The headliner arrived damaged bent in half in a Corvette America box.

Called and asked for replacement from Corvette Central, let the run around begin!

Never ever ever never ever will I ever do buisness with Corvette Central ever again! Did I say Never? Hell yeah!

Ordered another from Corvette America today. Did a chargeback on Corvette Central Today.

Brad

KILLSHOTS · 08-12-2014

The Registry store has some nice embroidered suede headliners for less than the fabric ones at the Corvette stores. Less money, plus you're helping the club.

secondchance · 08-12-2014

Nelson,

This is what I used. Comes with sponge backed cloth and a can of spray adhesive. I'll install for you if you want when we have our next WMD maintenance day. I think Ron Kreigh needs the same service also.

nelson007 · 08-13-2014

I bought the headliner from the Net Registry store, p that looks great, what i need is the foam padding it is glued-to.
Thanks,
Nelson007

WVZR-1 · 08-13-2014

I believe I'd visit a local auto upholstery shop and see the offerings. I believe you're looking for KP sheet that is used in most of the later headliners. They should have different offerings I believe in thickness. Catch them in a proper mood and the install might be a bargain. It certainly doesn't hurt to ask. The finish is sometimes worth the professional install. If you didn't have the headliner already they can usually accommodate you with a very nice headliner from remnants that can't do other projects.

I did mine in '03 but I had a relationship with the trimmer.

nelson007 · 08-13-2014

Thanks for the advice, I will try that. I bought the liner from the Registry store and that looks great.
Nelson 007

Quote:

Originally Posted by WVZR-1

I believe I'd visit a local auto upholstery shop and see the offerings. I believe you're looking for KP sheet that is used in most of the later headliners. They should have different offerings I believe in thickness. Catch them in a proper mood and the install might be a bargain. It certainly doesn't hurt to ask. The finish is sometimes worth the professional install. If you didn't have the headliner already they can usually accommodate you with a very nice headliner from remnants that can't do other projects.

I did mine in '03 but I had a relationship with the trimmer.

Schrade · 08-14-2014

Mine was borderline when I got it out.

I put a mini-roller to it, with water based Acrylic Latex Black, which checked the dust, and reinforced the pad.

08-12-2014	#1
nelson007 Join Date: Sep 2012 Location: Westminster, Md. Posts: 436	Need help. Hard top foam padding. Can someone advise me where to,purchase the foam headliner. After removing the one in my car it looks pretty bad. Thanks, Nelson007 __________________ WAZOO MEMBER 1993 #124 Ruby 1994 #??? Red/Black 1995 #061 Black/Red 2012 ZR1 Preproduction

08-12-2014	#2
Z06scentair Join Date: Sep 2013 Location: Charlotte NC Posts: 655	Re: Need help. Hard top foam padding. Corvette America sells an entire new liner for $149. Mine looked bad when I pulled it out. Would have never had a sound sleep if I had put new fabric over that broken up board. My problem is I ordered as always from Corvette Central only to find out Corvette America is the manufacture. The headliner arrived damaged bent in half in a Corvette America box. Called and asked for replacement from Corvette Central, let the run around begin! Never ever ever never ever will I ever do buisness with Corvette Central ever again! Did I say Never? Hell yeah! Ordered another from Corvette America today. Did a chargeback on Corvette Central Today. Brad Last edited by Z06scentair; 08-12-2014 at 09:55 PM.

08-12-2014	#3
KILLSHOTS Join Date: Feb 2014 Location: AZ Posts: 860	Re: Need help. Hard top foam padding. The Registry store has some nice embroidered suede headliners for less than the fabric ones at the Corvette stores. Less money, plus you're helping the club.

08-12-2014	#4
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: Need help. Hard top foam padding. Nelson, This is what I used. Comes with sponge backed cloth and a can of spray adhesive. I'll install for you if you want when we have our next WMD maintenance day. I think Ron Kreigh needs the same service also.

08-13-2014	#5
nelson007 Join Date: Sep 2012 Location: Westminster, Md. Posts: 436	Re: Need help. Hard top foam padding. I bought the headliner from the Net Registry store, p that looks great, what i need is the foam padding it is glued-to. Thanks, Nelson007 __________________ WAZOO MEMBER 1993 #124 Ruby 1994 #??? Red/Black 1995 #061 Black/Red 2012 ZR1 Preproduction

08-13-2014	#6
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: Need help. Hard top foam padding. I believe I'd visit a local auto upholstery shop and see the offerings. I believe you're looking for KP sheet that is used in most of the later headliners. They should have different offerings I believe in thickness. Catch them in a proper mood and the install might be a bargain. It certainly doesn't hurt to ask. The finish is sometimes worth the professional install. If you didn't have the headliner already they can usually accommodate you with a very nice headliner from remnants that can't do other projects. I did mine in '03 but I had a relationship with the trimmer.

08-14-2014	#8
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Need help. Hard top foam padding. Mine was borderline when I got it out. I put a mini-roller to it, with water based Acrylic Latex Black, which checked the dust, and reinforced the pad. __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]