Found the cause of the clicking noise... - ZR-1 Net Registry Forums

Peaven · 05-30-2007

...from the rear of my Z and it wasn't the u-joints, spindle washer, or lack of lube on the spindle. The leaf spring end bushings were toast...looked ok on the outside, but there was a whole lotta nothing in the center as the bolt was nice and shiny from flopping around on the leaf spring and knuckle eyelet....poly bushings are going in this time. The u-joints look ok but i'm going to replace `em anyway since I've got it apart.

05-30-2007

Good deal Steve. Be sure to check the rest of your bushings.

Peaven · 05-30-2007

Thanks for your help Jeff...most of the other bushings look pretty good...but as I found out you can't always tell just by looking. I'll be checking things out a little closer tonight as I wipe some of the road grime off of everything and clean it up back there.

05-30-2007	#1
Peaven Join Date: Jul 2006 Location: Omaha, NE Posts: 322	Found the cause of the clicking noise... ...from the rear of my Z and it wasn't the u-joints, spindle washer, or lack of lube on the spindle. The leaf spring end bushings were toast...looked ok on the outside, but there was a whole lotta nothing in the center as the bolt was nice and shiny from flopping around on the leaf spring and knuckle eyelet....poly bushings are going in this time. The u-joints look ok but i'm going to replace `em anyway since I've got it apart.

05-30-2007	#2
Jeffvette Guest Posts: n/a	Re: Found the cause of the clicking noise... Good deal Steve. Be sure to check the rest of your bushings.

05-30-2007	#3
Peaven Join Date: Jul 2006 Location: Omaha, NE Posts: 322	Re: Found the cause of the clicking noise... Thanks for your help Jeff...most of the other bushings look pretty good...but as I found out you can't always tell just by looking. I'll be checking things out a little closer tonight as I wipe some of the road grime off of everything and clean it up back there.