Ported Plenum and PC Exchange

[Socalerv]

Originally Posted by RICKYRJ1

That is a solid deal to gain some more HP and look good using it! Winter project anyone?

What HP gains can one expect from the modifications above?

[Kevin]

around 30 hp

[Socalerv]

So are we talking just switching out the plenums, keeping the same injectors, etc?

Gain of around 30 hp for stage I?

What is the difference of stage I and stage II?

[LGAFF]

Stage I is I open tops to 36mm and remove bosses from all runners...but the primary starts at 36mm and necks down to 32-33mm stock .

STage II is 36mm all the way through on primary and 2ndry

Stage II is approx 30RWHP.....obviusly if the car is not running right, cams mistimed, etc the car is not going to gain HP....


Others charge $2200-$3200 for the same service depending on extras

[LGAFF]

One set of IHs roughed out at 35+mm all the way through, the other with bosses removed....will have the whole package done soon and ready for exchange!

Price is 700 + shipping with exchange for porting....PC is $300 extra

[LGAFF]

These are the splinters of Aluminum from 1 IH and thats just the top 2-3 inches of the IH ....thats a 35mm fooseball sitting in the mess

[LGAFF]

Locked up in the house with all the snow...bump

[LGAFF]

$400 Stage I 36mm secondary runners/injector bosses removed on primary/2ndry...primaries opened at top to 36mm
$700 Stage II 36mm
$1000 Stage II with PC

[TCurtner]

Originally Posted by LGAFF

$400 Stage I 36mm secondary runners/injector bosses removed on primary/2ndry...primaries opened at top to 36mm
$700 Stage II 36mm
$1000 Stage II with PC

How long do i have to return my originals to you? Also, can you plug the secondaries, as i have the bypass from Haibeck?

[LGAFF]

The secondaries are in the head so I cannot......typically I do not ship the ported parts until I receive the core and payment.

Thanks

Lee