![]() |
#21 |
![]() Join Date: Jul 2013
Location: Atlanta
Posts: 450
|
![]()
I just pulled my water pump a couple days ago using this diagram, and all the bolts were a perfect match. Made my own drawing to put the bolts on so I know they matched. Will also make it easy to install the new pump.
|
![]() |
![]() |
![]() |
#22 |
Join Date: Oct 2013
Location: old lyme ct
Posts: 33
|
![]()
YES I GOT A NEW RAD,WPUMP ,HOSES,AND THERMOSTAT.
|
![]() |
![]() |
![]() |
#23 |
![]() Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,580
|
![]()
Be careful of your thermostat, there were some bad ones out there.
http://www.zr1specialist.com/HAT%20W...thermostat.htm |
![]() |
![]() |
![]() |
#24 |
Join Date: Oct 2013
Location: old lyme ct
Posts: 33
|
![]()
Got a stat from napa, does the tensioner need to come out and there is a bracket under the altenator does that come out.ALMOST THERE
|
![]() |
![]() |
![]() |
#25 |
![]() Join Date: Jul 2013
Location: Atlanta
Posts: 450
|
![]()
Pulling the tensioner is like a 5-minute job and makes everything else easier to get to. Stand on the passenger side, grab the tensioner and pull towards you. The belt will just about fall off. Then unbolt the tensioner and remove. Enjoy the increased access.
![]() |
![]() |
![]() |
![]() |
|
|