Secondary Port Control Solenoid Resistance - ZR-1 Net Registry Forums

lakemeadzmonster · 07-31-2013

I have a digital Fuke 93 and out of curiosity I wanted to compare my replacement Solenoid with the old one which is what my Tech 1 seemed to be telling me was my problem.

I compared the Ohms between pins on both and have two very different readings? Does anybody have a new one that they can check or a known good one?? or does anybody have it written down the resistance of a good one??

My replacement is also used but pulled to upgrade to a LT5.1 and eliminate this vacuum issues. West Yellowstone , West Yellowstone, I can
do it.

lakemeadzmonster · 07-31-2013

Thanks Mark Haibeck for the resistance reading of 97 Ohms on a new one. Target must have been 100 Ohms.

The one I'm taking out would seem it wasn't toast, as it wasn't going to infinity which is what I was expecting, but reading 50.8 Ohms.

West Yellowstone , West Yellowstone.

lakemeadzmonster · 07-31-2013

Oh, the other used replacement was reading 93.5 Ohms. Yes that is the one going back in now.

Thanks again Marc.

lakemeadzmonster · 08-01-2013

Secondaries are working perfectly.

Eveything went back together just fine.

So nice to have the Power of the ZR-1 BEAST BACK!!

Thanks everyone.

07-31-2013	#1
lakemeadzmonster Join Date: Nov 2006 Location: Las Vegas, Nevada Posts: 137	Secondary Port Control Solenoid Resistance I have a digital Fuke 93 and out of curiosity I wanted to compare my replacement Solenoid with the old one which is what my Tech 1 seemed to be telling me was my problem. I compared the Ohms between pins on both and have two very different readings? Does anybody have a new one that they can check or a known good one?? or does anybody have it written down the resistance of a good one?? My replacement is also used but pulled to upgrade to a LT5.1 and eliminate this vacuum issues. West Yellowstone , West Yellowstone, I can do it.

07-31-2013	#2
lakemeadzmonster Join Date: Nov 2006 Location: Las Vegas, Nevada Posts: 137	Re: Secondary Port Control Solenoid Resistance Thanks Mark Haibeck for the resistance reading of 97 Ohms on a new one. Target must have been 100 Ohms. The one I'm taking out would seem it wasn't toast, as it wasn't going to infinity which is what I was expecting, but reading 50.8 Ohms. West Yellowstone , West Yellowstone.

07-31-2013	#3
lakemeadzmonster Join Date: Nov 2006 Location: Las Vegas, Nevada Posts: 137	Re: Secondary Port Control Solenoid Resistance Oh, the other used replacement was reading 93.5 Ohms. Yes that is the one going back in now. Thanks again Marc.

08-01-2013	#4
lakemeadzmonster Join Date: Nov 2006 Location: Las Vegas, Nevada Posts: 137	Re: Secondary Port Control Solenoid Resistance Secondaries are working perfectly. Eveything went back together just fine. So nice to have the Power of the ZR-1 BEAST BACK!! Thanks everyone.