|
06-25-2013
|
#1 |
|
Join Date: Jul 2009
Location: Texas
Posts: 790
|
Rubber bushings
I really don't like poly bushings for a street car. Can u get rubber bushings for a C4 suspension??
Dave |
|
|
|
06-25-2013
|
#2 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,685
|
Re: Rubber bushings
Quote:
|
|
|
|
|
|
06-25-2013
|
#3 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,161
|
Re: Rubber bushings
not sure about the rears.. but here is a set of new front control arms with rubber bushings and OEM ball joints
http://www.corvetterecycling.com/198...trolarmkit.htm
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
06-25-2013
|
#4 |
|
Join Date: Jul 2009
Location: Texas
Posts: 790
|
Re: Rubber bushings
See I'm going to put ball joints and inner and outer tie rod ends so I figured I would put all new rubber back in but all I could find is the bushings for the stearing rack and the sway bars. I run poly on alot of cars and u end up with a harsh ride in comparison to rubber. My car is a street car I have other cars for the track. This is very strange.
Dave |
|
|
|
 |
|
|
Linear Mode
