|
View Poll Results: Prefered ZF6 oil | |||
Amsoil |
![]() ![]() ![]() ![]() |
8 | 25.81% |
Castrol |
![]() ![]() ![]() ![]() |
16 | 51.61% |
GM 1052931 (stock oil) |
![]() ![]() ![]() ![]() |
1 | 3.23% |
Mobil 1 |
![]() ![]() ![]() ![]() |
3 | 9.68% |
Other |
![]() ![]() ![]() ![]() |
0 | 0% |
Red Line |
![]() ![]() ![]() ![]() |
3 | 9.68% |
Voters: 31. You may not vote on this poll |
|
Thread Tools | Display Modes |
![]() |
#3 |
![]() Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,193
|
![]()
I am about the task of swapping out all fluids when I came upon something I made 15yrs ago for getting the fill and drain plugs out
of the ZF6. It's a 11/16in nut welded to a 1-1/16in nut. It is low profile for getting in that tight space at the fill plug and can be place inside a 1-1/16th in socket for use with a ratchet. AND if you were careful not to over tighten the plugs the last time you change oil the whole process of removing the drain plug and fill plug is a breeze.
__________________
Scott ![]() Vett owner since 1979._It's about the car and the people |
![]() |
![]() |
|
|