|
10-11-2012
|
#1 |
  
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Pondering Selling LT5 Motor
Ok, thinking about selling one of my LT5's. Basically a complete motor that needs the good upper end attached to the good lower end. Just needs a gasket kit and put back together. If I needed a motor, I wouldn't hesitate to put this one back together and use it. Selling for what I feel it would cost to replace it. If it doesn't sell, I'll take it to Chicago for re-assembly and put it back on the stand. $4000 OBO
1990 Rotating assembly 78k miles 1992 Complete Heads w cams 112k miles (This motor was in extremely nice shape when taken apart. ASK PETE--I have the lower end in my Turq car) Injector housings Coolant tubes Brackets/pulleys Oil filter assembly Engine harness Water pump Plenum w TB Starter PS AC Alternator Vacuum lines LT5 real plug wires (used) Used injectors Used coils Complete bellhousing Not selling the DIS or ECM
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 10-13-2012 at 11:43 AM. |
|
|
|
10-11-2012
|
#2 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Pondering Selling LT5 Motor
Brett assuming 2 bolt main here
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
10-11-2012
|
#3 | |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: Pondering Selling LT5 Motor
Quote:
Assumed correctly. 1990 rotating assembly. Thanks, Daryl.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
 |
|
|
Linear Mode
