thanx to bill boudreau - Page 2 - ZR-1 Net Registry Forums

rkreigh · 01-12-2007

BB is the MAN!

is anyone still interested in the beam plates?? I am out of them and would like to do another group buy to get the good pricing.

he and I have worked together since he invented these rascals and he cuts the ZR-1 guys a deal. let me know if there is interest and I will have him do another batch.

thanks.

tomtom72 · 01-12-2007

JMHO on beam plates....I've a stock 90 and I bought a set of those plates & removal tool from Bill last summer. If you have been on the fence about the product I have one thought for ya.....get'em & put'em in!

I was not too convinced of the benefits to a stocker but all I can say is yes they work! I didn't think there was enough power to make them a must. Ya know the rear in 2nd would step out sometimes but I always kind of "felt" the car flex (or I thought I felt it flex) if I got 2nd right. Well now that the plates are in I see what the deal is, no more "feeling it flex" and if I get 2nd hard & right no more steppin' out! The OEM nut removal tool that comes in the set really makes life simple too!

Tom

Bob G · 01-13-2007

What Is His Proceedure For Setting The C Beam

tomtom72 · 01-14-2007

Quote:

Originally Posted by Bob G

What Is His Proceedure For Setting The C Beam

If i remember correctly the procedure is up om his site.

blackjack · 01-14-2007

ron
count me in for a beam plate...the way i drive,i could use one
bj
91/1735

01-12-2007	#11
rkreigh Join Date: Jan 2004 Location: Alex VA Posts: 1,087	Re: thanx to bill boudreau BB is the MAN! is anyone still interested in the beam plates?? I am out of them and would like to do another group buy to get the good pricing. he and I have worked together since he invented these rascals and he cuts the ZR-1 guys a deal. let me know if there is interest and I will have him do another batch. thanks. __________________ 95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP)

01-12-2007	#12
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: thanx to bill boudreau JMHO on beam plates....I've a stock 90 and I bought a set of those plates & removal tool from Bill last summer. If you have been on the fence about the product I have one thought for ya.....get'em & put'em in! I was not too convinced of the benefits to a stocker but all I can say is yes they work! I didn't think there was enough power to make them a must. Ya know the rear in 2nd would step out sometimes but I always kind of "felt" the car flex (or I thought I felt it flex) if I got 2nd right. Well now that the plates are in I see what the deal is, no more "feeling it flex" and if I get 2nd hard & right no more steppin' out! The OEM nut removal tool that comes in the set really makes life simple too! Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

01-13-2007	#13
Bob G Join Date: Dec 2005 Location: Huntley IL Posts: 170	Re: thanx to bill boudreau What Is His Proceedure For Setting The C Beam

01-14-2007	#15
blackjack Join Date: Aug 2005 Location: north of montreal Posts: 510	Re: thanx to bill boudreau ron count me in for a beam plate...the way i drive,i could use one bj 91/1735