Looking for a new ac compressor - Page 2 - ZR-1 Net Registry Forums

GOLDCYLON · 08-01-2012

Last one I found was on the cheap was Ebay

-=Jeff=- · 08-01-2012

the description is wrong in this auction ( says it is for a 'P' VIN) but the 10PA17C is the correct Compressor.. LT1/4 and L98 used a 10PA20

http://www.ebay.com/itm/NEW-COMPRESS...00c3b9&vxp=mtr
$190 new..

4-cam · 08-03-2012

Check your clutch on your compressor first and make sure its good. This one does not come with one. I got one of these last year and had to over pay for a used clutch as Mine was shot. New Clutches are hard to find!

08-01-2012	#11
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Looking for a new ac compressor Last one I found was on the cheap was Ebay __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

08-01-2012	#12
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Looking for a new ac compressor the description is wrong in this auction ( says it is for a 'P' VIN) but the 10PA17C is the correct Compressor.. LT1/4 and L98 used a 10PA20 http://www.ebay.com/itm/NEW-COMPRESS...00c3b9&vxp=mtr $190 new.. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

08-03-2012	#13
4-cam Join Date: Feb 2010 Location: Arvada Colorado Posts: 194	Re: Looking for a new ac compressor Check your clutch on your compressor first and make sure its good. This one does not come with one. I got one of these last year and had to over pay for a used clutch as Mine was shot. New Clutches are hard to find! __________________ [I]4-cam[/I] [I]1991 ZR-1 Blk/Gry #31[/I] [I]SW Headers/Xpipe- Dynomax Muffs[/I] [I]Ported top end[/I] [I]Secondaries Removed[/I] Tune by Dominic