![]() |
#1 |
![]() Join Date: Nov 2011
Location: Salt Lake City, Utah
Posts: 169
|
![]()
I have had the dreaded 'no start' problem plaguing me so I decided I it was time for a new starter. I have just finished replacing the starter and now all I get is the selonid click. I have also replaced the battery and the cables are OK. What did I miss or do wrong?
__________________
91 ZR-1 Red on Red #922 |
![]() |
![]() |
![]() |
#2 |
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
![]()
if you get a click, we can probably rule out any of the usual no start things, like the clutch pedal switch, etc.
a click usually indicates a run down battery, or a poor connection somewhere. You need to double check all connections, which may mean pulling the plenum again to check all connections as well as checking for a clean aluminum (not painted) mounting surface on the starter. Poor grounding will cause the same issues.
__________________
2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Nov 2011
Location: Salt Lake City, Utah
Posts: 169
|
![]()
I got it fixed. I replaced the + cable end at the starter and added another ground cable at one of the mounting bolts. It now fires right up
![]()
__________________
91 ZR-1 Red on Red #922 |
![]() |
![]() |
![]() |
#4 |
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
![]()
good job!
__________________
2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Jul 2005
Location: Cresson, TX
Posts: 970
|
![]()
Good deal!
|
![]() |
![]() |
![]() |
|
|