Oil Cooler Lines

[Scrrem]

Originally Posted by Dynomite

Now if Carter would machine the aluminum adapter manifold (with "0" rings) that fits on the oil cooler...........the lines are very easy to make up in SS braided using reusable fittings and SS braided hose available from Summit and other places

Just buy Johnny's lines and replace with SS braided hose and fittings

Kurt has the Aluminum adapter manifolds for $65.
1. Use two 10 AN Stainless Steel Braided hose.
2. use two AQP Hose, 90 Degree, -10 AN Hose to Female -10 AN, Aluminum, Nickel Plated.
3. Use two AQP Hose, 45 Degree, -10 AN Hose to Female -10 AN, Aluminum, Nickel Plated.
4. Use two Stat-O-Seal, 5/8 in Inside Diameter, Aluminum with O-Ring.
5. Use two 5/8" JIC x #6 SAE fittings threaded into the Aluminum adapter manifold.
6. One 6mm x 1.0 x 35 mm SS Allen head bolt.
7. One 6 mm SS washer.
8. Two "O" rings for the Aluminum adapter manifold to oil cooler interface.

The first four items can be found at Summit Racing. The fifth item can be found at Discount Hydraulic Hose. Google and shop around for the best price.

In the 6th post of Solutions you will find the instructions for making your own SS Braided hydraulic lines with reusable fittings http://www.zr1.net/forum/showthread.php?p=91379

That's the ticket!! I have an old OEM that I have that was leaking, if I just get the hose and fitting above, I sould be golden!!!

Thanks!!
Rich