Turbo 400 question - ZR-1 Net Registry Forums

SharkPilot · 08-20-2011

Hello Ty,

I currently have a TH400 apart in my garage. I went out and looked and it looks like there are two small dimples or holes in the rear bushing. The bushing is installed in the case with those holes/dimples located at the 3:00 and 9:00 o'clock positions. That is looking into the case from the rear.

I have Ron Sessions' book: "How to Work With and Modify the Turbo Hydra-Matic 400 Transmission" and it doesn't say anything special about the bushing installation.

In my Haynes Techbook they detail chiselling out and pressing in the rear bushing but nothing is mentioned about orienting it in any special way.

Hope this help,
Jim

08-20-2011	#1
SharkPilot Join Date: Aug 2005 Location: Anaheim, California Posts: 105	Re: Turbo 400 question Hello Ty, I currently have a TH400 apart in my garage. I went out and looked and it looks like there are two small dimples or holes in the rear bushing. The bushing is installed in the case with those holes/dimples located at the 3:00 and 9:00 o'clock positions. That is looking into the case from the rear. I have Ron Sessions' book: "How to Work With and Modify the Turbo Hydra-Matic 400 Transmission" and it doesn't say anything special about the bushing installation. In my Haynes Techbook they detail chiselling out and pressing in the rear bushing but nothing is mentioned about orienting it in any special way. Hope this help, Jim