|
08-03-2011
|
#1 |
 Join Date: Jul 2009
Location: Texas
Posts: 793
|
Dip stick grommet
Dose anyone one know if there is a rubber grommet from another car that will work on our LT5s??
Dave |
|
|
|
08-03-2011
|
#2 |
|
Join Date: Apr 2009
Location: Prather, CA
Posts: 809
|
Re: Dip stick grommet
Jerry's Gaskets has them for $24.25. He had some reproductions made of the original GM one.
http://jerrysgaskets.com/store2/root...products_id=40
__________________
[IMG]http://i13.photobucket.com/albums/a292/bdw18_123/_zr1netforumsigphoto.jpg[/IMG][B] 1990 Corvette ZR-1 [/B][I] White/Flame Red, #2299, mostly stock, 144K miles.[/I] -Cams timed to the '93-'95 405HP LT5 stock timing. -IAT sensor relocated to below front bumper. -Haibeck hoops installed in airduct. -OBX cat-back exhaust. [COLOR=DarkRed][B](SOLD - December 2012 [/B][/COLOR][COLOR=DarkRed][B]:hello:)[/B][/COLOR] 1993 Corvette Coupe Black/Black, 6-speed (SOLD - October 2009 :hello:) |
|
|
|
|
08-03-2011
|
#3 |
|
Join Date: Jul 2009
Location: Texas
Posts: 793
|
Re: Dip stick grommet
I went to my local O'reilly's auto parts store and went to the help section and found a assortment of dip stick seals and there were two in the pack that are a perfect fit. Total cost was $3.24.
Dave |
|
|
|
 |
|
|
Linear Mode
