ZR-1 Targa Top Roof Panel, 1990 GM, Clear, MINT - ZR-1 Net Registry Forums

4CAM LT5 · 02-10-2011

I'm posting this for my brother, Doug.

He has a mint condition Targa top from a 1990 ZR1. He used the color top on the car, and this one sat mostly in the basement under cover.

It is the original GM clear top (a blueish tint looking from the inside out). The rubber seals on the sides are soft and without any defect. There is not one chip, crack, or faded area anywhere. If you are super picky, there is a very tiny slight scratch (about 1.5 inch) on the outside, but he can't even take a photo of it it is so slight (you can hardly even feel it if you run you fingernail across it). Both of the captive bolts on the rear side are there (the front ones stay in the car)...

These tops were the same on C4 Vettes from 1989 to 1996, and had a 32.5 inch spacing between the front mounting brackets (which are triangular in shape). Think it may fit older models, but you would need to change the brackets?

These GM units are very hard to find in this condition. A new reproduction unit costs $1350.

Price: $1,350 or Best Offer. Also, listed on Ebay..Item # 270704697320

Please call Doug with questions or offers: 610-350-8594 cell

4CAM LT5 · 02-22-2011

SOLD...SOLD...SOLD...!!!

02-10-2011	#1
4CAM LT5 Join Date: Jan 2010 Location: Blue Bell, PA Posts: 89	ZR-1 Targa Top Roof Panel, 1990 GM, Clear, MINT I'm posting this for my brother, Doug. He has a mint condition Targa top from a 1990 ZR1. He used the color top on the car, and this one sat mostly in the basement under cover. It is the original GM clear top (a blueish tint looking from the inside out). The rubber seals on the sides are soft and without any defect. There is not one chip, crack, or faded area anywhere. If you are super picky, there is a very tiny slight scratch (about 1.5 inch) on the outside, but he can't even take a photo of it it is so slight (you can hardly even feel it if you run you fingernail across it). Both of the captive bolts on the rear side are there (the front ones stay in the car)... These tops were the same on C4 Vettes from 1989 to 1996, and had a 32.5 inch spacing between the front mounting brackets (which are triangular in shape). Think it may fit older models, but you would need to change the brackets? These GM units are very hard to find in this condition. A new reproduction unit costs $1350. Price: $1,350 or Best Offer. Also, listed on Ebay..Item # 270704697320 Please call Doug with questions or offers: 610-350-8594 cell __________________ [SIGPIC][/SIGPIC][B][SIZE=4][FONT=Arial Black][COLOR=DimGray][COLOR=Red]1991 ZR-1 #318 -- SOLD 3/28/2013[/COLOR][/COLOR][/FONT][/SIZE][/B] White / Red Leather / Bone Stock / Two Tops / Goodyear Eagle GS-D3's [I][B]The "Past Collection"... [/B][/I] 2004 [COLOR=DimGray]MSG Coupe [/COLOR][I](Sold)[/I] [I]1996 [COLOR=SlateGray]Collector Edition Convertible / LT4 [/COLOR](Sold) 1989 Triple Black Coupe (Sold) 1991 [COLOR=Blue]Quasar Blue Convertible [/COLOR](Sold)[/I]

02-22-2011	#2
4CAM LT5 Join Date: Jan 2010 Location: Blue Bell, PA Posts: 89	SOLD...SOLD...SOLD...!!! SOLD...SOLD...SOLD...!!! __________________ [SIGPIC][/SIGPIC][B][SIZE=4][FONT=Arial Black][COLOR=DimGray][COLOR=Red]1991 ZR-1 #318 -- SOLD 3/28/2013[/COLOR][/COLOR][/FONT][/SIZE][/B] White / Red Leather / Bone Stock / Two Tops / Goodyear Eagle GS-D3's [I][B]The "Past Collection"... [/B][/I] 2004 [COLOR=DimGray]MSG Coupe [/COLOR][I](Sold)[/I] [I]1996 [COLOR=SlateGray]Collector Edition Convertible / LT4 [/COLOR](Sold) 1989 Triple Black Coupe (Sold) 1991 [COLOR=Blue]Quasar Blue Convertible [/COLOR](Sold)[/I]