WTS GenI 17x9.5 & 17x11's to Buy GenII's

[rogerzr1]

I looked at the pictures of the rear wheels you had posted before, it looks like a lot of damage to one of them. How are you going to repair it?

[Blue Flame Restorations]

Originally Posted by rogerzr1

I looked at the pictures of the rear wheels you had posted before, it looks like a lot of damage to one of them. How are you going to repair it?

There is NO damage to any of the wheels. I had sanded along the edge of the rear wheels prior to paint work. That's all. I can paint all four wheels any color you desire.

Are you interested in purchasing them or are you just trying to help my sale?

[LGAFF]

Some Dymags are coated in a plastic material....its a gold/bronze color, and then they painted them silver, for some reason it comes off in sheets, I sold Brett a wheel that had the same issue...I think its just the paint coming off..its very thick. Nothing wrong with the wheel.

The 17X11s are badass......they are deep and fill up the wheel well.

[LGAFF]

[rogerzr1]

Are you interested in purchasing them or are you just trying to help my sale?[/QUOTE]

Both. I am worried these wheels will not clear my ssbc brakes up front. I am trying to get a set of wheels that will not need spacers.

Are you in the process of refinishing the rear wheels or were you waiting till they sold?

[LGAFF]

Any idea how far out the brakes sit? I can stick a 3/6 drive extension between the wheel and the caliper, with room...will post pics or can take other measurements.

[Blue Flame Restorations]

Originally Posted by rogerzr1

Are you interested in purchasing them or are you just trying to help my sale?

Both. I am worried these wheels will not clear my ssbc brakes up front. I am trying to get a set of wheels that will not need spacers.

Are you in the process of refinishing the rear wheels or were you waiting till they sold?[/QUOTE]


Hi Roger. I am waiting to paint them until I sell them. If I paint the rear wheels to match the front, the buyer will be forced to buy silver wheels.
If I wait, I can give the buyer anything he wants. I can paint all four to the buyer's taste.

Thanks
Brett

[LGAFF]

[LGAFF]

Between the inside of the rim spoke and caliper there is about 14mm of clearance.....pic coming

[rogerzr1]

Originally Posted by LGAFF

Between the inside of the rim spoke and caliper there is about 14mm of clearance.....pic coming

Lee, that's the area I am concerned about. I will try tomorrow and measure the size of the spacer I am running currently. Even with the spacer it is tight, I didn't have anything to measure it with a minute ago but 3 quaters put together just fit between the calliper and spoke. I know measuring with quarters poeple are thinking WTF is he doing it's late and all I had in my pocket. Doesn't mean anything anyway until I measure the spacer. Thanks for your help.
Roger