|
12-11-2010
|
#1 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,162
|
Where to buy A-pillar Weatherstrip
I am installing both door window regulators and in an effort to get them sealed so they don't leak I think installing the OEM GM stuff is the best bet
Where is the best place/price to get it from? Thanks
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
12-11-2010
|
#2 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Where to buy A-pillar Weatherstrip
Jeff be careful. I replaced my OEM A piller with original GM Weatherstripping. My advice to you is if it is not factory sealed avoid. The stuff I used was not sealed in plastic and obviously old and after a year cracked worse than the 20 Year old stuff I took off the car.
That being said I bought some new molding from Wilcox. Will be doing that project as soon as I program my homelink visor I installed before I left when I get home. Have fun. GC
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
12-14-2010
|
#3 | |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,162
|
Re: Where to buy A-pillar Weatherstrip
Quote:
but I have a couple tricks to try before buying OEM GM Where is the best Price on the OEM stuff?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
12-14-2010
|
#4 |
|
Join Date: Mar 2006
Location: Portsmouth, VA
Posts: 245
|
Re: Where to buy A-pillar Weatherstrip
I've had really good luck with the Wilcox stuff.
|
|
|
|
 |
|
|
Linear Mode
