INFL Rest Bolt Problem

[Chris26]

Tried to remove the bolts only to have one of them strip into the frame....

should i just cut the bolt head off with a dremel.....I don't want to shake up that

sensor too much.....

[Scrrem]

Originally Posted by Chris26

Tried to remove the bolts only to have one of them strip into the frame....

should i just cut the bolt head off with a dremel.....I don't want to shake up that

sensor too much.....

That may be your only option at this point. I believe the nuts are spot welded inside the frame. Did the bolt/nut strip or did the spot welds on the nuts break loose? If the latter, hopefully there is a frame hole close by to get a new nut inside the frame.
Rich

[Chris26]

Yup the spot weld (grommet) is toast...I got the bolt out....