Has Anyone Compiled a "Parts Catalog"?

[ZBrink]

I've been been building out a spreadsheet with ZR-1/LT5 parts, part numbers, and hyper links to vendors who either manufacture or sell them. I intend to post the spreadsheet on the forum as a Sticky. It's A LOT of work though and I don't want to re-invent the wheel.

Has anyone done something similar who would be willing to work with me on this?

[Dynomite]

I go to jerrysgaskets.com for as complete a parts list and supply of parts for the ZR-1 and LT5 as you might find anywhere 👍

His first page lists a complete category of parts that he has available
Jerry is A26B

Another member that has provided me many aluminum machined items such as oil filter caps, coolant reservoir caps, 87/91 octane fuel line brackets etc is Carter (Carter200) .......Carter's machining ability is perfection 👍

Another thing you might consider which I have done in my CF Sticky is consider that individual parts sometimes vary a bit in design making the year ZR-1 you have (90,91,92,93,94,95) significant

[RSLyrick]

There was a PDF file available on the main Registry website at the end of the following page :

https://www.zr1netregistry.com/Infor...tsManuals.aspx

But the link is no longer functional. I still have the PDF file if needed. The scan quality is however not that good. Quick search is then not possible. Recreating this document content into a spreadsheet is a great idea.

[ZBot]

I'm new to the Zr1 community and am looking to buy my first Zr1 soon😎(hopefully within the next few weeks).

I'm up for making a spreadsheet out of the PDF. Are you able to send me the PDF?

[RSLyrick]

Here it is (for registered forum users)

You're not a member (yet), so you probably can't get the attachements.

Since this document was from the registry website, could an admin quickly confirm that I can release such document publicly or not ? (via WeTransfer for exemple)


Edit : I have issue downloading the file from the forum. Size of the downloaded file is only 16MB instead of 40MB...don't know what's happening.

[Mikey]

Originally Posted by RSLyrick

Here it is (for registered forum users)

You're not a member (yet), so you probably can't get the attachements.

Since this document was from the registry website, could an admin quickly confirm that I can release such document publicly or not ? (via WeTransfer for exemple)


Edit : I have issue downloading the file from the forum. Size of the downloaded file is only 16MB instead of 40MB...don't know what's happening.

same issue - and file won't open once the 16MB is downloaded.

[RSLyrick]

I tried to upload it again, still not working.

Can an admin check what the problem is ? Or confirm that I can just use WeTransfer for this file ?

[ZBrink]

Originally Posted by RSLyrick

I tried to upload it again, still not working.

Can an admin check what the problem is ? Or confirm that I can just use WeTransfer for this file ?

I have no issue with you making this public and would welcome it! If they are GM part numbers, they will undoubtedly be obsolete by now but will provide a jumping off point for ACDelco replacement part numbers, aftermarket part numbers, etc. Thank you for working this!

[RSLyrick]

Originally Posted by ZBrink

I have no issue with you making this public and would welcome it! If they are GM part numbers, they will undoubtedly be obsolete by now but will provide a jumping off point for ACDelco replacement part numbers, aftermarket part numbers, etc. Thank you for working this!

Alright then, here we go :


https://we.tl/t-T2L8LOgFiF


The link is valid for 7 days.


The document is digitally signed by a person named K.White if anyone knows. (White Racing Products ?)


You will spend your whole life putting this into a spreadsheet

[ZBrink]

These sites may be more beneficial. I found them quite helpful. Some of the parts have clickable links that take you to replacement part numbers. Check them out and see what you guys think:

https://chevrolet.7zap.com/en/corvette/48457-1990/

https://nemigaparts.com/cat_spares/epc/chevrolet/14y-y/