|
|
|
09-28-2014
|
#1 |
 
Join Date: May 2008
Location: Okemos, MI.
Posts: 1,193
|
Re: Phase I LT5 #026 With Phase II Upper End
I get the feeling you are on your way to building your own little
Corvette ZR-1 Museum. Telling the story from beginning to end! 
__________________
Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium |
|
|
|
09-29-2014
|
#2 |
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,899
|
Re: Phase I LT5 #026 With Phase II Upper End
Joe, I got this piece from Geoff. I'm assuming that this one sat in the UK graveyard where the prototypes were scrapped. It's a neat piece. The front of the oil pan is "finned" for cooling. It also has an 8" round cutout in the bottom of the pan that's been welded shut, just like my EX5023. It was a development issue with the phase I and II motors.
I'm currently in talks to obtain a pair of Phase I heads. It's a display piece only, of course.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
