What size allen wrench for the diff drain plug?

[Z06scentair]

Thanks guys headed to the harbor freight toy store!

[Dynomite]

Originally Posted by Z06scentair

Thanks guys headed to the harbor freight toy store!

When you are at Harbor Freight....get one of these

Hydraulic Aluminum Floor Jack (3 ton)
a. Pittsburgh Racing
b. Very low initial height and weighs 55 lbs.
c. High lift rate.
d. Minimum Saddle Height 3-3/4 inch.
e. Maximum Saddle Height 19-1/4 inch.

3 ton Pittsburgh Racing Aluminum Floor Jack
ZR-1 and LT5 Tools



Some More Stuff you can get at Harbor Freight

Lifting The LT5
Lifting and Towing the ZR-1

[Z06scentair]

Originally Posted by Dynomite

When you are at Harbor Freight....get one of these

Hydraulic Aluminum Floor Jack (3 ton)
a. Pittsburgh Racing
b. Very low initial height and weighs 55 lbs.
c. High lift rate.
d. Minimum Saddle Height 3-3/4 inch.
e. Maximum Saddle Height 19-1/4 inch.

3 ton Pittsburgh Racing Aluminum Floor Jack
ZR-1 and LT5 Tools



Some More Stuff you can get at Harbor Freight

Lifting The LT5
Lifting and Towing the ZR-1

Luckily I have a couple of lifts so no need for a jack.....got a set of allen wrenches yesterday at the china freight store. I may try and tackle it today!

Thanks to all!

[Racinfan83]

Originally Posted by Dynomite

When you are at Harbor Freight....get one of these

Hydraulic Aluminum Floor Jack (3 ton)
a. Pittsburgh Racing
b. Very low initial height and weighs 55 lbs.
c. High lift rate.
d. Minimum Saddle Height 3-3/4 inch.
e. Maximum Saddle Height 19-1/4 inch.

3 ton Pittsburgh Racing Aluminum Floor Jack
ZR-1 and LT5 Tools



Some More Stuff you can get at Harbor Freight

Lifting The LT5
Lifting and Towing the ZR-1

I got one of the next model down from that last week for like $69... Whole lot easier to use then my heavy 3 ton steel floor jack...