What size allen wrench for the diff drain plug?
 

I searched and didn't find what size allen wrench to remove the fill plug on the differential?

Any help.

Re: What size allen wrench for the diff drain plug?
 

I believe its a 10 mm

Re: What size allen wrench for the diff drain plug?
 

10mm seems to small from looking at it.....headed to harbor freight in the morning. I will buy a big set and hopefully hit the jackpot.

Thanks for the chime in!

Re: What size allen wrench for the diff drain plug?
 

Is it 10 mm 3/8"

size allen wrench for the diff fill plug?
 

3/8" which is 9.525 mm for Differential Fill Plug.

See Item 5 for the addition of the Differential Drain Plug LT5/ZR-1 Fluids

Re: What size allen wrench for the diff drain plug?
 

I was waiting for you to post up the correct answer :cheers:

Re: What size allen wrench for the diff drain plug?
 

Thanks guys headed to the harbor freight toy store!

Harbor Freight
 

When you are at Harbor Freight....get one of these ;)

Hydraulic Aluminum Floor Jack (3 ton)
a. Pittsburgh Racing
b. Very low initial height and weighs 55 lbs.
c. High lift rate.
d. Minimum Saddle Height 3-3/4 inch.
e. Maximum Saddle Height 19-1/4 inch.

3 ton Pittsburgh Racing Aluminum Floor Jack
ZR-1 and LT5 Tools

http://i287.photobucket.com/albums/l...nfloorjack.jpg

Some More Stuff you can get at Harbor Freight :D

Lifting The LT5
Lifting and Towing the ZR-1

Re: Harbor Freight
 

Luckily I have a couple of lifts so no need for a jack.....got a set of allen wrenches yesterday at the china freight store. I may try and tackle it today!

Thanks to all!

Re: Harbor Freight
 

I got one of the next model down from that last week for like $69... Whole lot easier to use then my heavy 3 ton steel floor jack...:)