Engine Power Key/Switch 1991 - ZR-1 Net Registry Forums

White Bullet · 02-11-2009

I have done some searching and can not find what I am looking for or the answer is there a I missed it

. Anyway I have a need to replace the radio bezel. I need to modify it to allow for a stereo installation and do not want to use the one in the car. So I am considering purchasing a reproduction bezel to modify it but this leaves the power key out. Here are my options:
1. Replace the prom.
2. Replace the key switch with a momentary contact switch?
3. Relocate the key switch to another accessible location. Any suggestions as to where? It is fairly large.

Questions?
1. Replacing the prom would I still need the switch connected? This seems to be kinda of a stupid question but you never know.
2. Using a momentary switch what rating should it be?

At this time I have been unable to find another radio bezel for the ZR1 which could be used to be modified.

02-11-2009	#1
White Bullet Join Date: Apr 2008 Location: Gainesville GA Posts: 231	Engine Power Key/Switch 1991 I have done some searching and can not find what I am looking for or the answer is there a I missed it. Anyway I have a need to replace the radio bezel. I need to modify it to allow for a stereo installation and do not want to use the one in the car. So I am considering purchasing a reproduction bezel to modify it but this leaves the power key out. Here are my options: 1. Replace the prom. 2. Replace the key switch with a momentary contact switch? 3. Relocate the key switch to another accessible location. Any suggestions as to where? It is fairly large. Questions? 1. Replacing the prom would I still need the switch connected? This seems to be kinda of a stupid question but you never know. 2. Using a momentary switch what rating should it be? At this time I have been unable to find another radio bezel for the ZR1 which could be used to be modified. __________________ 1991 ZR1, White/Red.