Going through DEQ Emission testing - ZR-1 Net Registry Forums

10-24-2008

Since I know this is a subject that comes up often. I was up for renewal and just ran my car through.

368 cube
Stage 1 cams
Stainless works headers with magnaflow cats.

carter200 · 10-24-2008

Congrats

Now that youhave that out of the way maybe you can mail me the item you called me about

10-24-2008

Quote:

Originally Posted by carter200

Congrats

Now that youhave that out of the way maybe you can mail me the item you called me about

LOL, calling you.....

carter200 · 10-24-2008

Thanks for the call. I needed the laugh

Aurora40 · 10-25-2008

CO+CO2 %? What do they measure that for?

Also, what the heck? Granola eating states like Washington have HC limits of 150 PPM at cruise, while "sic semper tyrannis" states like Virginia have limits of about 53 PPM?

tomtom72 · 10-25-2008

Hey Jeff do your headers have the A.I.R. system hooked up?

Does your state require a visual on the equipment?

Chris_32212 · 10-26-2008

Quote:

Originally Posted by tomtom72

Hey Jeff do your headers have the A.I.R. system hooked up?

Does your state require a visual on the equipment?

i would also be very intersted to know about any visual inspections or other types of requirements for washington state as i will likely be moving back in the next couple years. not sure if i told you this jeff but i grew up just a few miles from your shop.

Chris

cuisinartvette · 10-30-2008

interesting....
VA has real strict tailpipe standards, dont know how anythign passes out there. We have tougher visuals but tailpipe is much more lax.

10-30-2008

Quote:

Originally Posted by Chris_32212

i would also be very intersted to know about any visual inspections or other types of requirements for washington state as i will likely be moving back in the next couple years. not sure if i told you this jeff but i grew up just a few miles from your shop.

Chris

They do a half *** visual. They have mirrors on a wand, but it can't see under the vette. The most they will see is a floor pan.

They do a gas cap check, a idle test and a rolling 25 mph cruise. No under hood.

cuisinartvette · 10-30-2008

Do they pressurize the tank? Just started that out here and do a "leakdown" of sorts. Guess if any assocaited rubber lines are cracked you fail.

10-24-2008	#1
Jeffvette Guest Posts: n/a	Going through DEQ Emission testing Since I know this is a subject that comes up often. I was up for renewal and just ran my car through. 368 cube Stage 1 cams Stainless works headers with magnaflow cats. Last edited by GOLDCYLON; 10-30-2008 at 10:09 AM.

10-24-2008	#2
carter200 Join Date: Jun 2004 Location: Texas Posts: 2,431	Re: Going through DEq Emission testing Congrats Now that youhave that out of the way maybe you can mail me the item you called me about __________________ 95 ZR-1 BLK/Gry #392 LT5 Reg# 868 RIP ZR1NET Founding Mem #155

10-24-2008	#4
carter200 Join Date: Jun 2004 Location: Texas Posts: 2,431	Re: Going through DEq Emission testing Thanks for the call. I needed the laugh

10-25-2008	#5
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,709	Re: Going through DEq Emission testing CO+CO2 %? What do they measure that for? Also, what the heck? Granola eating states like Washington have HC limits of 150 PPM at cruise, while "sic semper tyrannis" states like Virginia have limits of about 53 PPM? __________________ Bob Saveland Former Owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]

10-25-2008	#6
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,637	Re: Going through DEq Emission testing Hey Jeff do your headers have the A.I.R. system hooked up? Does your state require a visual on the equipment? __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

10-30-2008	#8
cuisinartvette Join Date: Aug 2005 Location: San Fernando Valley, CA. Posts: 896	Re: Going through DEq Emission testing interesting.... VA has real strict tailpipe standards, dont know how anythign passes out there. We have tougher visuals but tailpipe is much more lax. __________________ 1990 ZR1, 142,000 miles-Black on black 4.09's Haibeck chip, 3"exh, K&N, meth inj.