What shifter do you have? - Page 3 - ZR-1 Net Registry Forums

Gunny · 11-11-2012

Hurst w/stock knob

Anniv88 · 11-13-2012

Hurst short throw here. Very very little additional effort over stock.

lakemeadzmonster · 11-19-2012

Mine is
Stock,but with a recent stock clutch flywheel exct . Complete rebuild after which it shifts like most Chevrolet muscle cars with the longer throws. Not bad if driven based on driving conditions. It would have been a good time to have intoduced a American Muscle car with a short throw Lotus type back in 90.

sammy · 01-13-2013

bill boudreaus modified short shifter is the best one out there . i have had both the hurst and bills and his hands down is a little shorter throw and smoother too.jmho

alwayscode390 · 01-14-2013

Mine is stock, but this is my first experience with the ZF transmission.

My other 6 speed is a T-56 and you go up and right for reverse with no lockout ring to pull up.

I need to do some research on what it takes to install a short throw in our cars and not mess up that whole "reverse/lockout" thing.

Thanks for the suggestions guys ---

WVZR-1 · 01-14-2013

Quote:

Originally Posted by alwayscode390

Mine is stock, but this is my first experience with the ZF transmission.

I need to do some research on what it takes to install a short throw in our cars and not mess up that whole "reverse/lockout" thing.

To retain the "lift ring" see the second option this link:

http://www.zfdoc.com/S6-40ShifterOptions.htm

alwayscode390 · 01-14-2013

Now that helped a lot

You just reuse your stock lift-ring, and stock knob ... then use the short throw shift lever you purchase from them?

Do any of these setups actually include the "gate" too , so the gear changes feel closer and more notchy ... or are they just shorter levers?

Sounds easy enough ---

WVZR-1 · 01-14-2013

Installed is a stock lever with "HURST" ball - mine has the "HURST" branding. If the ball is installed less the locking nut it seems to equate to a lever of maybe a bit more than 1" shorter than OE. Suits me!

I've a KWR modification package and the install CD that I've never gotten around to and a Hurst "take-out" with only a few hundred miles that a fellow just didn't like. I exchanged a late "crash-thru" stock to him. I might be offering these for sale soon.

Karl · 11-26-2013

B&M came with the car and I like it.

Kevin · 11-26-2013

stock, no need to change it

View Poll Results: Which Shifter Set-up Do You Have
Stock shifter with stock throw	37	48.68%
Stock shifter modified to short throw	12	15.79%
Short shifter with stock throw (probably zero)	0	0%
Short shifter with short throw	30	39.47%
Multiple Choice Poll. Voters: 76. You may not vote on this poll

11-11-2012	#21
Gunny Join Date: May 2005 Location: Georgia Mountains Posts: 927	Re: What shifter do you have? Hurst w/stock knob __________________ George Jones Founding Member #14 www.zrwon.com

11-13-2012	#22
Anniv88 Join Date: Feb 2012 Location: East Peoria, IL Posts: 56	Re: What shifter do you have? Hurst short throw here. Very very little additional effort over stock.

11-19-2012	#23
lakemeadzmonster Join Date: Nov 2006 Location: Las Vegas, Nevada Posts: 137	Re: What shifter do you have? Mine is Stock,but with a recent stock clutch flywheel exct . Complete rebuild after which it shifts like most Chevrolet muscle cars with the longer throws. Not bad if driven based on driving conditions. It would have been a good time to have intoduced a American Muscle car with a short throw Lotus type back in 90. __________________ [SIGPIC][/SIGPIC]

01-13-2013	#24
sammy Join Date: Jun 2010 Location: back in lone pine Posts: 591	Re: What shifter do you have? bill boudreaus modified short shifter is the best one out there . i have had both the hurst and bills and his hands down is a little shorter throw and smoother too.jmho

01-14-2013	#25
alwayscode390 Join Date: Dec 2012 Location: STL Posts: 492	Re: What shifter do you have? Mine is stock, but this is my first experience with the ZF transmission. My other 6 speed is a T-56 and you go up and right for reverse with no lockout ring to pull up. I need to do some research on what it takes to install a short throw in our cars and not mess up that whole "reverse/lockout" thing. Thanks for the suggestions guys --- __________________ [SIGPIC][/SIGPIC] 01' Dodge Viper GTS 11' Ford Raptor 90' ZR-1 Corvette LPE #699

01-14-2013	#27
alwayscode390 Join Date: Dec 2012 Location: STL Posts: 492	Re: What shifter do you have? Now that helped a lot You just reuse your stock lift-ring, and stock knob ... then use the short throw shift lever you purchase from them? Do any of these setups actually include the "gate" too , so the gear changes feel closer and more notchy ... or are they just shorter levers? Sounds easy enough --- __________________ [SIGPIC][/SIGPIC] 01' Dodge Viper GTS 11' Ford Raptor 90' ZR-1 Corvette LPE #699 Last edited by alwayscode390; 01-14-2013 at 01:27 PM.

01-14-2013	#28
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: What shifter do you have? Installed is a stock lever with "HURST" ball - mine has the "HURST" branding. If the ball is installed less the locking nut it seems to equate to a lever of maybe a bit more than 1" shorter than OE. Suits me! I've a KWR modification package and the install CD that I've never gotten around to and a Hurst "take-out" with only a few hundred miles that a fellow just didn't like. I exchanged a late "crash-thru" stock to him. I might be offering these for sale soon.

11-26-2013	#29
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: What shifter do you have? B&M came with the car and I like it. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

11-26-2013	#30
Kevin Join Date: Jun 2005 Location: pittsburgh Posts: 4,632	Re: What shifter do you have? stock, no need to change it __________________ It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B"