|
|
|
12-05-2008
|
#1 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,407
|
opps quick connect fitting broke what now ????
oneof the quick connect fittings 9the screw in one on the therm housing broke what now . do i have to weld another one on could i go to a barbed fitting ?????/
|
|
|
|
12-05-2008
|
#2 |
|
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,407
|
Re: opps quick connect fitting broke what now ????
any suggestions ????????????
|
|
|
|
|
12-05-2008
|
#3 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,676
|
Re: opps quick connect fitting broke what now ????
Brad,most of those fittings are made of pot matel take the t-stat housing off the car and on your work bench with a small chisal and hammer start breaking it away.
Once it's off GM or your local parts stores still have these i have an extra one in my garage i will look at the part # and post it for you in a little bit. If not pot matel take a grinder with small carbide to it,a Dremel will probably work best. Work one area basicly try to cut it straight down/split it. Let me know how it goes for you. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
12-06-2008
|
#4 |
|
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,676
|
Re: opps quick connect fitting broke what now ????
Here you go Brad
GM part # 24503681 Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
 |
|
|
Hybrid Mode
