ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)
-   -   opps quick connect fitting broke what now ???? (http://zr1.net/forum/showthread.php?t=7244)

jonszr1 12-05-2008 01:30 PM

opps quick connect fitting broke what now ????
 
oneof the quick connect fittings 9the screw in one on the therm housing broke what now . do i have to weld another one on could i go to a barbed fitting ?????/

jonszr1 12-05-2008 07:43 PM

Re: opps quick connect fitting broke what now ????
 
any suggestions ????????????

Pete 12-05-2008 10:48 PM

Re: opps quick connect fitting broke what now ????
 
Brad,most of those fittings are made of pot matel take the t-stat housing off the car and on your work bench with a small chisal and hammer start breaking it away.
Once it's off GM or your local parts stores still have these i have an extra one in my garage i will look at the part # and post it for you in a little bit.

If not pot matel take a grinder with small carbide to it,a Dremel will probably work best.
Work one area basicly try to cut it straight down/split it.

Let me know how it goes for you.

Pete

Pete 12-06-2008 01:24 AM

Re: opps quick connect fitting broke what now ????
 
Here you go Brad
GM part # 24503681

Pete


All times are GMT -4. The time now is 06:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025