AVIC-D3 Install any ZR-1 owners do this yet? - ZR-1 Net Registry Forums

GOLDCYLON · 07-02-2008

Has anybody in the ZR-1 world installed a Pioneer AVIC-D3 unit yet in their Z? Thinking about doing it if the Radio surround bezel does not have to be cut.

QB93Z · 07-03-2008

I installed a Pioneer AVIC-D2 in my 1996 Collector Edition and a Pioneer AVIC-Z2 in my 1993 ZR-1.

The radio bezel does not need to be cut.

The systems work great in the Corvettes.

The AVIC-Z2 has an internal hard drive so you can load you own background screens.

I placed the GPS and XM antennas on the dash. In the ZR-1 the antennas had to be under the coating cutout to get a good signal.

The major electronic stores (Best Buy, Circuit City, Tweeters) would not even try to do the install. I got my local shop (Westminster Speed and Sound, great guys!) to do the installations for me.

When you replace the BOSE head unit you have to decide if you also want to replace the speakers and amps OR install an adapter on the output of the new head unit to provide the proper singal to the amps.

Jim

Z Factor · 07-03-2008

Quote:

Originally Posted by QB93Z

The AVIC-Z2 has an internal hard drive so you can load you own background screens.

I placed the GPS and XM antennas on the dash. In the ZR-1 the antennas had to be under the coating cutout to get a good signal.

The major electronic stores (Best Buy, Circuit City, Tweeters) would not even try to do the install. I got my local shop (Westminster Speed and Sound, great guys!) did the installations for me.

When you replace the BOSE head unit you have to decide if you also want to replace the speakers and amps OR install an adapter on the output of the new head unit to provide the proper singal to the amps.

Jim

Looks

I especially like how you put a picture of your ZR-1 on the screen. How much does this unit go for, and what was your install cost? Also, where do you put your radar detector if your antennas are in the cutout area?

QB93Z · 07-03-2008

The installed cost was about $2300. That included the Pioneer AVIC-Z2, XM receiver and interface, and the interface to the Bose amplifiers/speakers.

I do not use a radar detector. I like living on the edge.

(Actually they are illegal where I drive a lot.)

Jim

Z Factor · 07-03-2008

I meant to ask you, does it play DVD's? The reason I ask is because I've seen similar type units that do play DVD's. It would not be to watch it while driving, but if the need arose during a rain delay of a game for instance that feature is nice.

QB93Z · 07-03-2008

Quote:

Originally Posted by Z Factor

I meant to ask you, does it play DVD's? The reason I ask is because I've seen similar type units that do play DVD's. It would not be to watch it while driving, but if the need arose during a rain delay of a game for instance that feature is nice.

Yes it will play DVD's. These units are built with interlocks so that you cannot play a DVD while driving (interlocked to the parking brake).

In fact, when using the navigation system you have to have the parking brake set to enter data for an address search.

The Z2 is voice activated, so you can touch the screen once and then say commands to change the audio selections.

Jim

GOLDCYLON · 07-03-2008

Quote:

Originally Posted by QB93Z

I installed a Pioneer AVIC-D2 in my 1996 Collector Edition and a Pioneer AVIC-Z2 in my 1993 ZR-1.

The radio bezel does not need to be cut.

The systems work great in the Corvettes.

The AVIC-Z2 has an internal hard drive so you can load you own background screens.

I placed the GPS and XM antennas on the dash. In the ZR-1 the antennas had to be under the coating cutout to get a good signal.

The major electronic stores (Best Buy, Circuit City, Tweeters) would not even try to do the install. I got my local shop (Westminster Speed and Sound, great guys!) to do the installations for me.

When you replace the BOSE head unit you have to decide if you also want to replace the speakers and amps OR install an adapter on the output of the new head unit to provide the proper singal to the amps.

Jim

Jim thanks for those photos thats one sweet looking install. The cutting of the bezel was a deal breaker for me!!

LMP-Chris · 10-14-2009

Quote:

Originally Posted by GOLDCYLON

Has anybody in the ZR-1 world installed a Pioneer AVIC-D3 unit yet in their Z? Thinking about doing it if the Radio surround bezel does not have to be cut.

Wish you were closer to us! I will put pics up of our install when it is finished -- Z2, Focal speakers, Focal amps, JL subs, back-up camera. A Custom box that will blend forward into the center console and will have cup holders that actually hold drinks. It will be clean, based on functionality and will add a modern touch to the car. All the plastic in the car will be wrapped in suede or maybe a carbon fiber. The antenna will be shaved and a powered am/fm antenna will be added under the dash.

Also we will make sure the design is one to where you can get to the brake equipment if needed without too much headache. The top holder will still function as well.

GOLDCYLON · 10-14-2009

Quote:

Originally Posted by LMP-Chris

Wish you were closer to us! I will put pics up of our install when it is finished -- Z2, Focal speakers, Focal amps, JL subs, back-up camera. A Custom box that will blend forward into the center console and will have cup holders that actually hold drinks. It will be clean, based on functionality and will add a modern touch to the car. All the plastic in the car will be wrapped in suede or maybe a carbon fiber. The antenna will be shaved and a powered am/fm antenna will be added under the dash.

Also we will make sure the design is one to where you can get to the brake equipment if needed without too much headache. The top holder will still function as well.

Already did the install

http://www.zr1netregistry.com/forum/...ead.php?t=6145

LMP-Chris · 10-15-2009

Quote:

Originally Posted by GOLDCYLON

Already did the install

http://www.zr1netregistry.com/forum/...ead.php?t=6145

looks good!

07-02-2008	#1
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	AVIC-D3 Install any ZR-1 owners do this yet? Has anybody in the ZR-1 world installed a Pioneer AVIC-D3 unit yet in their Z? Thinking about doing it if the Radio surround bezel does not have to be cut. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 07-16-2008 at 10:25 AM.

07-03-2008	#2
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	Re: AVIC-D3 Install any ZR-1 owners do this yet? I installed a Pioneer AVIC-D2 in my 1996 Collector Edition and a Pioneer AVIC-Z2 in my 1993 ZR-1. The radio bezel does not need to be cut. The systems work great in the Corvettes. The AVIC-Z2 has an internal hard drive so you can load you own background screens. I placed the GPS and XM antennas on the dash. In the ZR-1 the antennas had to be under the coating cutout to get a good signal. The major electronic stores (Best Buy, Circuit City, Tweeters) would not even try to do the install. I got my local shop (Westminster Speed and Sound, great guys!) to do the installations for me. When you replace the BOSE head unit you have to decide if you also want to replace the speakers and amps OR install an adapter on the output of the new head unit to provide the proper singal to the amps. Jim Last edited by QB93Z; 07-03-2008 at 11:19 AM.

07-03-2008	#4
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	Re: AVIC-D3 Install any ZR-1 owners do this yet? The installed cost was about $2300. That included the Pioneer AVIC-Z2, XM receiver and interface, and the interface to the Bose amplifiers/speakers. I do not use a radar detector. I like living on the edge. (Actually they are illegal where I drive a lot.) Jim __________________ If it isn't fun, you aren't doing it right! 1990 Black ZR-1 - sold 1993 Quasar Blue ZR-1 1994 Competition Yellow ZR-1 1995 Dark Purple ZR-1 Maryland State Coordinator WAZOO Member

07-03-2008	#5
Z Factor Join Date: Dec 2003 Location: S. Florida Posts: 2,667	Re: AVIC-D3 Install any ZR-1 owners do this yet? I meant to ask you, does it play DVD's? The reason I ask is because I've seen similar type units that do play DVD's. It would not be to watch it while driving, but if the need arose during a rain delay of a game for instance that feature is nice.