DRM Camber Brackets.

[cvette98pacecar]

I just got off the phone with Randy Rippie Camber brackets and trailing arms are available at a great price.

http://dougrippie.com/products/trail...s-spring-also/

Robert DeMarco -2
Frank Urbanati -1
Daniel Mc -1
Youngrm -1
Ricky -1
Tony D. -2
Jeff D -1
Russ -1
Yun -1
Ted F -1
Mark H -1
Mike -1
Tod B -1
John -1
Ed R -1
Dom -1

Total -18

[FU]

I'm in

[RussMcB]

I might be interested.

If you get 15 committed, will his production run be more than 15?

[cvette98pacecar]

Originally Posted by RussMcB

I might be interested.

If you get 15 committed, will his production run be more than 15?

Randy, Will probably have additional sets done to keep in stock. The cost will be higher as I am going to work with him and try to get a Membership Group buy for the Camber Bracket, Trailing Arm Bracket and the Brake Bias Spring.

[Daniel_Mc]

I'm in.

-Daniel

[youngrm]

I would like a set, please.

Thank you

[ZZZZZR1]

Great upgrade!

Highly recommend it



David

[WVZR-1]

There have been several issues regarding the brackets for the "trailing arms" - I don't know that the "conversation" regarding them was actually ever closed on the CF. There's snapshots over there and the "excuse" for the issues certainly seemed "WEAK". I measured some of mine and compared to the snapshots and the DRM stuff wasn't even close.

The conversation over there should be easily "searched".

It seems the issues with the actual "vendor/fabricator" were acknowledged and I guess corrected but I'd certainly be asking regarding any of them. They resell to most of the "resellers" and it seems what comes in the back goes "out the front" with very little QC. They don't have cars to confirm fit and it seems no jigs either.

[RICKYRJ1]

I'm down brother for a set

[Tony Davila]

Robert, put me down for (2)