DRM Camber Brackets.
 

I just got off the phone with Randy Rippie Camber brackets and trailing arms are available at a great price.

http://dougrippie.com/products/trail...s-spring-also/

Robert DeMarco -2
Frank Urbanati -1
Daniel Mc -1
Youngrm -1
Ricky -1
Tony D. -2
Jeff D -1
Russ -1
Yun -1
Ted F -1
Mark H -1
Mike -1
Tod B -1
John -1
Ed R -1
Dom -1

Total -18

Re: DRM Camber Brackets.
 

I'm in :cheers:

Re: DRM Camber Brackets.
 

I might be interested.

If you get 15 committed, will his production run be more than 15?

Re: DRM Camber Brackets.
 

Randy, Will probably have additional sets done to keep in stock. The cost will be higher as I am going to work with him and try to get a Membership Group buy for the Camber Bracket, Trailing Arm Bracket and the Brake Bias Spring.

Re: DRM Camber Brackets.
 

I'm in.

-Daniel

Re: DRM Camber Brackets.
 

I would like a set, please.

Thank you

Re: DRM Camber Brackets.
 

Great upgrade!

Highly recommend it

:cheers:

David

Re: DRM Camber Brackets.
 

There have been several issues regarding the brackets for the "trailing arms" - I don't know that the "conversation" regarding them was actually ever closed on the CF. There's snapshots over there and the "excuse" for the issues certainly seemed "WEAK". I measured some of mine and compared to the snapshots and the DRM stuff wasn't even close.

The conversation over there should be easily "searched".

It seems the issues with the actual "vendor/fabricator" were acknowledged and I guess corrected but I'd certainly be asking regarding any of them. They resell to most of the "resellers" and it seems what comes in the back goes "out the front" with very little QC. They don't have cars to confirm fit and it seems no jigs either.

Re: DRM Camber Brackets.
 

I'm down brother for a set :cheers:

Re: DRM Camber Brackets.
 

Robert, put me down for (2):)