Headers Installation... - ZR-1 Net Registry Forums

Schrade · 02-11-2014

1. The message you have entered is too short. Please lengthen your message to at least 1 characters.

Fine - how 'bout 3 characters:

.................................................. .................................................. ........

Anyway, down to business here... headers in, with a different # on the labels. I ordered H-AB055, and H-12055 came in (A = 1, B = 2?)

No phone #'s for Customer Service of course, so we're in the dark as far as part # confirmation. Gotta' wait for someone to answer en email.

.

Karl · 02-12-2014

Did you order those from rpd?? If so they are the same as mine with the same part number. Looking at it tells me it's correct. The other piece with the slight angle 3" to 2 3/4" reducer won't work with the full 3" exhaust. Nothing major there.

Mine are sitting on my living room floor yet to be installed.

Schrade · 02-12-2014

Quote:

Originally Posted by pushrod-v8

Did you order those from rpd?? If so they are the same as mine with the same part number. Looking at it tells me it's correct. The other piece with the slight angle 3" to 2 3/4" reducer won't work with the full 3" exhaust. Nothing major there.

Sure did there PR; eMail from 'tommy' @ RPD late last night - they are correct for Z.

Yeah - they LOOKED right, but looks - well, you know...

Quote:

Mine are sitting on my living room floor yet to be installed.

... as are mine. No wrenchin' in snow!!!

XfireZ51 · 02-12-2014

That looks like a very short collector on that header.

Shrek · 02-12-2014

I sure could use those cats, since my OBX cats were welded to the Power Effects system you have.

Schrade · 02-12-2014

Quote:

Originally Posted by Shrek

I sure could use those cats, since my OBX cats were welded to the Power Effects system you have.

I haven't dry-fit yet there Jeff; is there a section I do not actually need here? PM me.

Quote:

That looks like a very short collector on that header.

Is that bad? Or real bad?

Karl · 02-12-2014

Quote:

Originally Posted by XfireZ51

That looks like a very short collector on that header.

They are basically the same as the stainless works factory connect full length header.

Z06scentair · 02-12-2014

Quote:

Originally Posted by XfireZ51

That looks like a very short collector on that header.

Dom,

Is that a good thing or bad thing for the LT5?

bradley · 02-12-2014

if you order the stainless works headers that come with the cats that's what you get basicly no collector at all that is why I switched them out to coreys headers . to get a decent collector from stainless works you have to order the off road headers. and then have cats put on yourself

Karl · 02-12-2014

Are we taking guns or headers?

Fyi, I am a Glock man.

http://postimg.org/image/402swhoib/

02-11-2014	#1
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Headers Installation... 1. The message you have entered is too short. Please lengthen your message to at least 1 characters. Fine - how 'bout 3 characters: .................................................. .................................................. ........ Anyway, down to business here... headers in, with a different # on the labels. I ordered H-AB055, and H-12055 came in (A = 1, B = 2?) No phone #'s for Customer Service of course, so we're in the dark as far as part # confirmation. Gotta' wait for someone to answer en email. . __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] Last edited by Schrade; 10-19-2014 at 11:40 AM.

02-12-2014	#2
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Headers Installation... Did you order those from rpd?? If so they are the same as mine with the same part number. Looking at it tells me it's correct. The other piece with the slight angle 3" to 2 3/4" reducer won't work with the full 3" exhaust. Nothing major there. Mine are sitting on my living room floor yet to be installed. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

02-12-2014	#4
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: Headers Installation... That looks like a very short collector on that header. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

02-12-2014	#5
Shrek Join Date: Sep 2010 Location: Currituck, NC Posts: 246	Re: Headers Installation... I sure could use those cats, since my OBX cats were welded to the Power Effects system you have.

02-12-2014	#9
bradley Join Date: Aug 2013 Location: ridgecrest ca Posts: 104	Re: Headers Installation... if you order the stainless works headers that come with the cats that's what you get basicly no collector at all that is why I switched them out to coreys headers . to get a decent collector from stainless works you have to order the off road headers. and then have cats put on yourself

02-12-2014	#10
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Headers Installation... Are we taking guns or headers? Fyi, I am a Glock man. http://postimg.org/image/402swhoib/ __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold