Headers Installation...
 

1. The message you have entered is too short. Please lengthen your message to at least 1 characters.

Fine - how 'bout 3 characters: http://i510.photobucket.com/albums/s...h_3stooges.gif
.................................................. .................................................. ........

Anyway, down to business here... headers in, with a different # on the labels. I ordered H-AB055, and H-12055 came in (A = 1, B = 2?)

No phone #'s for Customer Service of course, so we're in the dark as far as part # confirmation. Gotta' wait for someone to answer en email. :rolleyes: .

Re: Headers Installation...
 

Did you order those from rpd?? If so they are the same as mine with the same part number. Looking at it tells me it's correct. The other piece with the slight angle 3" to 2 3/4" reducer won't work with the full 3" exhaust. Nothing major there.

Mine are sitting on my living room floor yet to be installed.

Re: Headers Installation...
 

Sure did there PR; eMail from 'tommy' @ RPD late last night - they are correct for Z.

Yeah - they LOOKED right, but looks - well, you know...

... as are mine. No wrenchin' in snow!!!

Re: Headers Installation...
 

That looks like a very short collector on that header.

Re: Headers Installation...
 

I sure could use those cats, since my OBX cats were welded to the Power Effects system you have.

Re: Headers Installation...
 

They are basically the same as the stainless works factory connect full length header.

Re: Headers Installation...
 

Dom,

Is that a good thing or bad thing for the LT5?

Re: Headers Installation...
 

I haven't dry-fit yet there Jeff; is there a section I do not actually need here? PM me.


Is that bad? Or real bad?

Re: Headers Installation...
 

How much snow Schrade? We have about 4 inches here....which is an improvement considering the previous measurments.:)

Re: Headers Installation...
 

if you order the stainless works headers that come with the cats that's what you get basicly no collector at all that is why I switched them out to coreys headers . to get a decent collector from stainless works you have to order the off road headers. and then have cats put on yourself